{"title":"Footswitches \\","description":null,"products":[{"product_id":"radial-bigshot-aby-true-bypass-switch-pedal-r8007200","title":"Radial BigShot ABY True-Bypass Switch Pedal","description":"\u003ch2 class=\"p1\"\u003eRadial BigShot ABY True-Bypass Switch Pedal\u003c\/h2\u003e\n\u003cp\u003eThe never ending quest for great guitar tone drives the purest to extremes. One amp for clean one amp for distortion. But combining amps is not always simple. Often, when two amps are connected together, differing ground references can cause slight buzz to extreme noise that can be so bad that they are unusable. Products such as the popular Radial Switchbone AB-Y switcher provide elegant solutions by introducing a buffer into the signal path and the use of photocell switching, but alas, they do so at a premium price. For many, these extras are not needed.\u003c\/p\u003e\n\u003cp\u003eAnother consideration in a switcher pedal is size and practicality in actual use on a pedalboard. The ABY is designed to be as small as possible and with the connectors and cables located at the front of the unit, where they will have the least impact on valuable stage space used. The Radial BigShot ABY answers the need for a compact, simple and effective amp switcher with straight wire true-bypass connectivity for the purist, with the option to switch a noise eliminating transformer into the circuit should ground loop induced hum and buzz be a problem.\u003c\/p\u003e\n\u003ch4\u003eEffective control for your two-amp setup\u003c\/h4\u003e\n\u003cp\u003eThe BigShot ABY makes it easy to run two amps on stage, without introducing noise or altering your tone. The pedal has two latching footswitches that allow you to choose which amp is active, or run through both simultaneously. The second amp output features a ground lift and an isolation transformer that can be engaged to eliminate buzz and hum from ground loops, while a 180° polarity reverse switch ensures both amps play back in phase to avoid frequency cancellation. When powered by an external 9V supply or pedalboard power brick, LEDs provide instant on-stage visual feedback - when power is unavailable, the passive audio circuit still works unaffected. Best of all, the BigShot ABY is true-bypass device, without any tone-altering buffers between the guitar and the amplifier to ensure you retain the pure tone of your instrument.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"New | In Stock","offer_id":46168001741083,"sku":"BIGSHOTABY","price":134.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | In Stock","offer_id":47961019384091,"sku":"BIGSHOTABYEBAYPRO","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/bigshot-aby-product_top.jpg?v=1692022325"},{"product_id":"radial-bones-r800-7115-twin-city-a-b-y-footswitch-twincity","title":"Radial Engineering Twin City ABY Footswitch","description":"\u003cp\u003eThe Twin-City footswitch from Radial Engineering is an active ABY switcher and buffer that enables you to connect any two amps and drive them simultaneously without noise, loss of gain, and without degrading your natural guitar tone. This is accomplished with Radial's highly acclaimed buffering technology and the same Drag Control load correction circuitry as used in the award-winning Radial JD7 Injector. The 'set and' forget Drag Control lets you compensate for cable signal loss and introduce the perfect amount of loading to replicate the way your guitar and amp interact. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output B. This is augmented with a ground lift switch and 180° polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum even when using older vintage amps that are generally more prone to noise. As a buffer, the Twin-City footswitch lowers the impedance and susceptibility to noise, making it the ideal signal driver for large stages when using long cable runs. Like all Radial products, the Bones are constructed from heavy 14 gauge steel for greater durability and added 'stay put' when kicked around on a busy stage. For even greater durability, the Twin-City footswitch employs Radial's own EIS-Electronic Impulse Switching-for outstanding performance without the challenges of mechanical switches. Bright, easy to see LEDs deliver on-stage switching cues so you know exactly where you are at all times.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBundle Includes 2 Cables!\u003c\/li\u003e\n\u003cli\u003eBuffered ABY with Drag load correction\u003c\/li\u003e\n\u003cli\u003eIsolated output eliminates hum and buzz\u003c\/li\u003e\n\u003cli\u003e180° polarity sets both amps in phase\u003c\/li\u003e\n\u003cli\u003eCompact to fit on any pedalboard\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Radial Engineering","offers":[{"title":"Pre-Owned | In Stock","offer_id":46168003215643,"sku":"TWINCITYEBAYPRO","price":199.99,"currency_code":"USD","in_stock":true},{"title":"New | In Stock","offer_id":46168003248411,"sku":"TWINCITY","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/twin-city-product_top.jpg?v=1692022320"},{"product_id":"radial-bigshot-efx-effects-switcher-c01","title":"Radial BigShot EFX Effects Switcher Pedal","description":"\u003cp\u003e\n\tThe BigShot EFX is a true-bypass effects loop switcher that lets you set up two separate effects loops and insert them into your pedal chain at will. This means that noisy pedals or tone robbing non true-bypass pedals that you ‘love to hate’ can now be used and completely taken out of the signal path when they are not needed.\u003c\/p\u003e\n\u003cp\u003e\n\tBetter yet, while an effects loop is on ‘standby’, you can turn on and off pedals at will and prepare your sound. Then, with one foot stomp you can turn on as many pedals as you like for professional multi-effects performance without the usual tap dancing! Add the \u003cspan style=\"text-decoration: underline;\"\u003eBig Shot PB\u003c\/span\u003e buffer into the loop and you can now drive as many pedals as you like without adding noise. For those that like quiet tuning, you can use the second loop as a tuner out and the BigShot EFX will mute your signal with a single stomp.\u003c\/p\u003e\n\u003cp\u003e\n\tCompact, rugged and plug \u0026amp; play easy to use, the BigShot EFX opens the door to professional pedal management and lets you do it all right at your feet!\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Pre-Owned | On Order","offer_id":46168027824411,"sku":"BIGSHOTEFXEBAYPRO","price":179.0,"currency_code":"USD","in_stock":false},{"title":"New | On Order","offer_id":46168027857179,"sku":"BIGSHOTEFX","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/bigshot-efx-product_top.jpg?v=1692022612"},{"product_id":"orange-ftswch-single-button-footswitch-c01","title":"Orange FS1 Single Button Footswitch","description":"\u003ch2\u003eOrange FTSWCH Single Button Footswitch\u003c\/h2\u003e\n\u003cdiv\u003eThe Orange FS1 is a single function footswitch with LED and 1\/4 inch input jack. For use on AD30TC, Rockerverb 50 and 100, Rocker 30, Thunderverb 50 and 200. Not for use with Crush range. \u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eTough Steel Casing\u003c\/li\u003e\n\u003cli\u003eLED indicator\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Orange","offers":[{"title":"New | In Stock","offer_id":46168087920923,"sku":"FTSWCH","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/orangefoot1-large.jpg?v=1692023247"},{"product_id":"radial-tonebone-headbone-vt-valve-tube-amp-head-switcher-c01","title":"Radial Tonebone Headbone VT Valve Tube Amp Head Switcher","description":"\u003cp\u003eThe Radial Headbone is an advanced amplifier switching device that allows two different guitar amp heads to be used with a single speaker cabinet. With the Headbone, one head could be used for rhythm while a second head could be used for soloing. With 100% discreet Class-A circuitry and choice of either buffered or un-buffered inputs, the Headbone will be of particular interest for players that demand the utmost in tonal performance.\u003c\/p\u003e\n\u003cp\u003eThe Headbone's internal switching comprises a sequence of relays, photocells, and load resistors, all of which are controlled via a digitally programmed chip. Hit the footswitch and the Headbone toggles the guitar signal from one amp to the other, disconnects the speaker and diverts the signal to a load resister, reconnects the speaker to the second head and turns on the guitar, all in quick succession. The Headbone features SafeMode™ whereby even when power is disconnected; the Headbone will automatically default to 'head-1 to cabinet' status, ensuring a constant load on the amplifier.\u003c\/p\u003e\n\u003cp\u003eHeadbone comes equipped with Slingshot™, an easy-to-use switching system that uses any standard footswitch to toggle the Headbone's status remotely, from wherever the footswitch is located. Slingshot lets you keep the amp-to-speaker cables short and efficient and opens up new switching possibilities too.\u003c\/p\u003e\n\u003cp\u003eThe Headbone is available in 3 models: The VT for two valve\/tube heads, the SS for two solid-state heads and the TS for tube to solid-state amp head switching.\u003cbr\u003e \u003cbr\u003e Headbone – another Radial 'power tool' for serious guitarists.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: Verdana, Arial, Helvetica, sans-serif;\"\u003eThe Radial Headbone combines simplicity with functionality. Hook-up was designed to be intuitive for all users, be they neophyte or experienced technician. Although most will be able to connect and play through the unit immediately, we recommend a thorough reading of the \u003ca href=\"http:\/\/www.tonebone.com\/manual-headbone.pdf\"\u003euser guide\u003c\/a\u003e first for best results and safety.\u003cbr\u003e \u003cbr\u003e In use, the Cabbone is a model of logical design and offers the professional guitarist the ultimate in creative options on stage through smooth and noise free amplifier switching.\u003cbr\u003e \u003cbr\u003e An on-board footswitch toggles between amp heads and large LED indicators monitors the current signal path. Tonebone's versatile Slingshot™ system allows remote controlled switching between heads from any stage position (eg.: a pedalboard) using just regular ¼\" to ¼\" guitar cables.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"New | In Stock","offer_id":46168101585179,"sku":"HEADBONEVT","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/headbone-vt-product_top.jpg?v=1692023455"},{"product_id":"mxr-m199-tap-tempo-switch-bx-ea-m199-c01","title":"MXR Tap M199 Tempo Switch BX-EA","description":"\u003ch2\u003eMXR M199 Tap Tempo Switch BX-EA\u003c\/h2\u003e\n\u003cp\u003eThe MXR Tap Tempo switch features adjustable tip\/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a lifetime on the road.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable tip\/ring configuration \u003c\/li\u003e\n\u003cli\u003eRuggedly built, road-ready construction \u003c\/li\u003e\n\u003cli\u003eCan be used with a variety of pedal types\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MXR","offers":[{"title":"New | In Stock","offer_id":46168575639835,"sku":"M199","price":45.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | In Stock","offer_id":47187118129435,"sku":"M199EBAYPRO","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/m199.main.jpg?v=1692026505"},{"product_id":"peavey-sanpera-i-guitar-footswitch-3017540-c01","title":"Peavey Sanpera® I Guitar Footswitch","description":"\u003cp\u003eThe Sanpera I footswitch includes an expression pedal for controlling volume, wah and pitch shifter functions, plus 4 momentary feature selector buttons. (A momentary switch gives you momentary use of the desired effect as long as the button is depressed. Releasing the button ends the effect.) The Sanpera I is housed in a roadworthy, rugged cast-metal casing and features high-quality metal switches.\u003c\/p\u003e","brand":"Peavey","offers":[{"title":"New | On Order","offer_id":46168754061595,"sku":"SANPERA1","price":149.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | On Order","offer_id":47321370493211,"sku":"SANPERA1EBAYPRO","price":91.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/SANPERA1EBAYPRO_1.jpg?v=1725913618"},{"product_id":"peavey-sanpera-ii-guitar-footswitch-sanperaii-c01","title":"Peavey Sanpera® II Guitar Footswitch","description":"\u003cp\u003eThe Sanpera II footswitch includes 2 expression pedals for controlling volume, wah and pitch shifter functions, plus 10 momentary feature selector buttons. (A momentary switch gives you momentary use of the desired effect as long as the button is depressed. Releasing the button ends the effect.) The Sanpera I is housed in a roadworthy, rugged cast-metal casing and features high-quality metal switches.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Volume\/Wah\/Pitch Shifter expression pedal\u003c\/li\u003e\n\u003cli\u003e10 momentary selector buttons with LEDs\u003c\/li\u003e\n\u003cli\u003eTap tempo capabilities\u003c\/li\u003e\n\u003cli\u003eLooper activation and control\u003c\/li\u003e\n\u003cli\u003eBank select function\u003c\/li\u003e\n\u003cli\u003eRoadworthy cast-metal housing\u003c\/li\u003e\n\u003cli\u003eHigh-quality metal switches\u003c\/li\u003e\n\u003cli\u003eSelf-powered via MIDI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Peavey","offers":[{"title":"New | On Order","offer_id":46168807735579,"sku":"SANPERA2","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | In Stock","offer_id":47102186946843,"sku":"SANPERA2EBAYPRO","price":212.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/unnamed_11.jpg?v=1692027168"},{"product_id":"radial-jr2-remote-control-with-a-b-input-select-and-mute-with-led-indicators-jr2radial-c01","title":"Radial JR-2 Remote Control with A\/B Input Select and Mute with LED indicators","description":"\u003cp\u003eThe Radial JR2 Remote Control is a mute switch and AB select in one pedal. The JR2 connects to the device using a standard balanced audio cable with choice of ¼\" TRS or XLR connections. The JR2 is unique in that it derives its power from the device being controlled which in turn illuminates the on-board LED indicators to show the remote status. Both switches are latching type.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"New | In Stock","offer_id":46171162771739,"sku":"JR2RADIAL","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/jr-2-product_top.jpg?v=1692028947"},{"product_id":"strymon-tap-favorite-preset-and-tap-tempo-switch-tap","title":"Strymon Mini Switch Preset \u0026 Tap Tempo Switch","description":"\u003cdiv\u003eEvery guitarist has their favorite presets they love to use whether its on a gig or in the studio. No with Strymon's new Tap Favorite Footswitch. The Tap Favorite let's you store a preset of your Favorite settings on your Brigadier, El Capistan, Lex, or Flint pedals or remotely tap tempos for your TimeLine, Mobius or Flint pedals. Add the Tiny Tap Favorite switch and connect to your Strymon pedal with the included 1\/4\" TRS cable. With the Favorite mode enabled, saving and recalling your Favorite preset is a snap. When you turn off your Favorite, it reverts back to the current knob states of your pedal. It’s like having two pedals ready to choose from.When using Tap Tempo mode, you can place your TimeLine, Mobius, or Flint anywhere on your pedalboard and tap in your tempos remotely. Perfect for large rigs or boards with pedals fighting for real estate.\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cspan style=\"font-weight: bold;\"\u003eFeatures and Specs\u003c\/span\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e• Switch between Favorite mode and Tap Tempo mode via an internal jumper\u003c\/li\u003e\n\u003cli\u003e• Use Favorite mode to save and recall your favorite preset settings\u003c\/li\u003e\n\u003cli\u003e• Favorite mode compatible with Brigadier, El Capistan, Lex, and Flint\u003c\/li\u003e\n\u003cli\u003e• Favorite mode can also be used as an external speed switch with Lex\u003c\/li\u003e\n\u003cli\u003e• Use Tap Tempo mode for external tap tempo\u003c\/li\u003e\n\u003cli\u003e• Tap Tempo mode compatible with TimeLine, Mobius, and Flint\u003c\/li\u003e\n\u003cli\u003e• 1\/4\" TRS cable included\u003c\/li\u003e\n\u003cli\u003e• No additional power supply required\u003c\/li\u003e\n\u003cli\u003e• Rugged black anodized aluminum chassis\u003c\/li\u003e\n\u003cli\u003e• Super small and lightweight: measures 2\" W x 2.25\" D x 1.8\" H\u003c\/li\u003e\n\u003cli\u003e• Designed and built in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-style: italic;\"\u003ePlease Note: There are no discounts on Strymon products of any kind. Coupons, promotional codes, discounts, etc are not applicable to Strymon Products online or in store purchases. \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Strymon","offers":[{"title":"Pre-Owned | In Stock","offer_id":46171632238875,"sku":"TAPEBAYPRO","price":40.0,"currency_code":"USD","in_stock":true},{"title":"New | On Order","offer_id":46171632271643,"sku":"TAP","price":49.0,"currency_code":"USD","in_stock":true},{"title":"New - Version: FBA | On Order","offer_id":49450429546779,"sku":"TAPFBA","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/miniswitch.jpg?v=1692029323"},{"product_id":"line-6-helix-control-floor-based-controller-for-helix-rack-guitar-processor-990402705-c01","title":"Line 6 Helix Control Floor-Based Controller for Helix Rack Guitar Processor","description":"\u003ch2\u003eHelix Control Floor-Based Controller for Helix Rack Guitar Processor\u003c\/h2\u003e\n\n\u003ch4\u003eSpeed up your editing with the optional Helix Control\u003c\/h4\u003e\n\u003cp\u003eHelix Rack can be controlled by almost any MIDI-capable device, but adding Helix Control gives you the same functionality as the floor based Helix, opening up a new world of creativity. With Helix Control connected over a single cable, Rack users can select a block for editing by touching a footswitch, create custom labels for the scribble strips, connect up to three expression pedals, and edit parameters hands-free for the first time using Pedal Edit Mode.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy metal chassis cuts weight and takes up less floor space\u003c\/li\u003e\n\u003cli\u003eTouch-sensitive footswitches with LED rings \u0026amp; custom scribble strip displays\u003c\/li\u003e\n\u003cli\u003e3 expression pedal inputs allow maximum foot pedal customizability\u003c\/li\u003e\n\u003cli\u003eSingle cable connection provides data and power\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Line 6","offers":[{"title":"New | In Stock","offer_id":46172657615131,"sku":"990402705","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/helixcontrolfront.jpg?v=1692030474"},{"product_id":"jhs-pedals-mini-a-b-box-switcher-pedal-bcg325226","title":"JHS Pedals Mini A\/B Box Switcher Pedal","description":"\u003cp\u003eJHS Pedals construct their Mini A\/B from a Hammond 1.5\"x3.6” metal enclosure with high quality jacks and switch. They also include a dual color (red\/green) LED to let you know by sight if your using A or B. This is very practical in a live situation.\u003c\/p\u003e\n\u003cp\u003eHere are the best uses for the JHS Pedals handmade Mini A\/B:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChoose between two amps on the fly\u003c\/li\u003e\n\u003cli\u003eTake your guitar tuner out of your signal chain\u003c\/li\u003e\n\u003cli\u003eChoose between two guitars with no unplugging of cables\u003c\/li\u003e\n\u003cli\u003eMute your guitar instantly\u003c\/li\u003e\n\u003cli\u003eAnywhere you need to choose inputs or outputs, this box does the job!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis pedal is passive but requires standard 9V DC Negative power for the LED to function.\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"New | On Order","offer_id":46172707946779,"sku":"MINIABBOX","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/jhs_pedals_mini_ab.png?v=1692030577"},{"product_id":"quilter-selectable-two-position-foot-controller-for-micropro-steelaire-amps-ufc201-2-c01","title":"Quilter Selectable Two-Position Foot Controller for MicroPro \u0026 Steelaire Amps","description":"\u003ch2\u003eWhy you need the Two-Position Foot Controller from Quilter:\u003c\/h2\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"widows: 1;\"\u003eThis \u003c\/span\u003e\u003cspan style=\"box-sizing: border-box; border: 0px; vertical-align: baseline; margin: 0px; padding: 0px; font-stretch: inherit; widows: 1;\"\u003eSelectable Two-Position Foot Controller for MicroPro \u0026amp; Steelaire Series Amps\u003c\/span\u003e\u003cspan style=\"widows: 1;\"\u003e by \u003c\/span\u003e\u003cspan style=\"box-sizing: border-box; border: 0px; vertical-align: baseline; margin: 0px; padding: 0px; font-stretch: inherit; widows: 1;\"\u003eQuilter\u003c\/span\u003e\u003cspan style=\"widows: 1;\"\u003e allows you to select any of six amplifier functions for each of the two buttons. This pedal gives you more on-stage flexibility and convenience by allowing you to toggle channel switching, boost, limiter, reverb, and FX loop by using your foot.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003cdiv style=\"widows: 1;\"\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv style=\"widows: 1;\"\u003e\u003cbr\u003e\u003c\/div\u003e\u003ch3\u003eFeatures:\u003c\/h3\u003e\u003cdiv style=\"widows: 1;\"\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv style=\"widows: 1;\"\u003e\u003cul\u003e\n\u003cli\u003eCompatible with MicroPro and Steelaire Series amps\u003c\/li\u003e\n\u003cli\u003eControls two selectable amp parameters\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"Quilter Amps","offers":[{"title":"New | On Order","offer_id":46172845539611,"sku":"UFC201-2","price":89.0,"currency_code":"USD","in_stock":false},{"title":"Pre-Owned | On Order","offer_id":47102566433051,"sku":"UFC201-2EBAYPRO","price":73.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/ufc2012-1.jpg?v=1692030827"},{"product_id":"electro-harmonix-nano-pog-polyphonic-octave-generator-pedal-nanopog-c01","title":"Electro Harmonix Nano Pog Polyphonic Octave Generator Pedal","description":"\u003ch2\u003eElectro Harmonix Nano Pog Polyphonic Octave Generator Pedal\u003c\/h2\u003e\n\u003cp\u003eThe Electro Harmonix Nano Pog Polyphonic Octave Generator Pedal provides different separate level controls for octaves and sub octaves. It also includes extra dry and silent footswitching. All of these are made for perfectly clean tracking and sound to track sweeps, chords and even single notes. \u003c\/p\u003e\n\u003ch3\u003eFeatures: \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable original pitch volume\u003c\/li\u003e\n\u003cli\u003eIncludes both octave up and down volume \u003c\/li\u003e\n\u003cli\u003eSilent footswitching \u003c\/li\u003e\n\u003cli\u003eDry output jack \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Electro Harmonix","offers":[{"title":"New | In Stock","offer_id":46173073342747,"sku":"NANOPOG","price":230.4,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | In Stock","offer_id":47187147620635,"sku":"NANOPOGEBAYPRO","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/nanopog.png?v=1710441519"},{"product_id":"strymon-multiswitch-extended-control-for-timeline-bigsky-and-mobius-multiswitch-c01","title":"Strymon MultiSwitch Extended Control for Timeline, BigSky and Mobius","description":"\u003ch3\u003eWhy You Need The Strymon MultiSwitch Extended Control for Timeline, BigSky and Mobius!\u003c\/h3\u003e\n\u003cdiv\u003eWant to unlock the full functionality of TimeLine’s looper? Or discover a new means of exploring presets on TimeLine, BigSky, or Mobius?\u003c\/div\u003e\n\u003cdiv\u003eConnect the Strymon MultiSwitch Extended Control for Timeline, BigSky and Mobius to your TimeLine, BigSky, or Mobius with the included 1\/4″ TRS cable and add a new dimension to your rig. Not only does MultiSwitch give you full control over TimeLine’s Looper in a simple, compact format, it also unlocks three additional looping features: Reverse, Half Speed, and Undo\/Redo. Use MultiSwitch to control your TimeLine Looper in two different ways. MultiSwitch allows instant access to TimeLine’s Record\/Overdub, Play, and Stop functions without holding the TAP switch to enter Looper Mode. Easily access looping features while retaining footswitch control over your delay sounds. Hold TimeLine’s TAP switch to enter looper mode, and MultiSwitch now gives you instant access to Reverse, Half Speed, and Undo\/Redo. Gain access to a versatile, 6-button looper that is excellent for live looping and experimentation. MultiSwitch gives you a new means of exploring preset banks. Use the left switch to move down a bank, right switch to move up a bank, and middle switch to cycle through your presets within the current bank. A great way to explore all of your presets. MultiSwitch to recall the perfect preset on your TimeLine, BigSky, or Mobius. Easily scroll through saved presets using the left and right switches, and engage\/bypass the preset you have selected with the middle switch. MultiSwitch to scroll through your saved presets and control your tap tempo all at once. Perfect for TimeLine and Mobius – use the left switch to scroll down through your saved presets, the right switch to scroll up, and the middle switch to tap in the perfect delay tempo or modulation speed.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch3 style=\"text-align: center;\"\u003eSee what the MultiSwitch can do for your Strymon pedals!\u003c\/h3\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e {{asset=462,align=center,width=75%}}\u003c\/div\u003e","brand":"Strymon","offers":[{"title":"New | In Stock","offer_id":46173323788571,"sku":"MULTISWITCH","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | On Order","offer_id":49034827399451,"sku":"MULTISWITCHEBAYPRO","price":89.99,"currency_code":"USD","in_stock":false},{"title":"New - Version: FBA | On Order","offer_id":49450445766939,"sku":"MULTISWITCHFBA","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/strymon-multiswitch-extended-control-for-timeline-bigsky-and-mobius_1_2000x_dd779275-f557-4e92-bebb-1b528fd2713d.jpg?v=1692031842"},{"product_id":"voodoo-lab-control-switcher-guitar-footswitch-cx-c01","title":"Voodoo Lab Control Switcher Guitar Footswitch","description":"\u003ch2\u003eVoodoo Lab Control Switcher Guitar Footswitch\u003c\/h2\u003e\n\u003cp\u003eSwitch channels on multiple amps and easily automate any non-MIDI functions with Control Switcher. Using a Commander or Ground Control Pro, Voodoo Lab’s new Control Switcher gives you instant MIDI programmability for controlling all footswitchable amp functions including channel switching, reverb, boost, EQ, loop and more.\u003c\/p\u003e","brand":"Voodoo Labs","offers":[{"title":"New | In Stock","offer_id":46173324607771,"sku":"CONTROLSWITCHER","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/controlswitcher.jpg?v=1692031842"},{"product_id":"orange-amp-detonator-buffered-aby-switcher-ampdetonator-c01","title":"Orange Amp Detonator Buffered ABY Switcher","description":"\u003ch2\u003eOrange Amp Detonator Buffered ABY Switcher\u003c\/h2\u003e\n\u003cdiv\u003eIt’s a well-known fact that running two amps is not only enormous fun, but also a time-honored way of achieving bigger tones on stage and in the studio. Whether it’s switching between two different amplifiers for their individual characteristics (rhythm and lead, for example) or using them simultaneously for huge walls of sound, pros have been employing this setup for decades. Achieving this easily, however, has always been a problem for guitar players. Poor quality passive ABY boxes\/line selectors load the guitar signal down, degrading the tone and rendering the whole exercise almost pointless. Not to mention ground hum issues caused by non-isolated outputs. On the other hand, active ABY pedals are in short supply and are usually quite cumbersome.\u003c\/div\u003e\n\u003ch4\u003eStep forward: The Amp Detonator.\u003c\/h4\u003e\n\u003cdiv\u003eFeaturing two buffered outputs, one with a custom designed isolating transformer, we are pretty confident that the Amp Detonator is the smallest active, fully functional, buffered ABY pedal on the market. What’s more, it’s the only active ABY switcher that can be powered by a 9V battery. The transformer output has been meticulously engineered to be as transparent as possible, whilst both outputs are buffered with a low noise, linear circuit. Drive any length of cable to your amps with no loss of clarity and switch silently between them. No more unnerving ‘thumps’ for you or the sound guy! The Amp Detonator also has a push-button polarity switch to correct common phase issues between amplifiers, keeping the tone fat and full. Finally, the tri-colour LED is a handy feature, especially on dark stages, indicating your current switching setting at a glance.\u003c\/div\u003e","brand":"Orange","offers":[{"title":"New | On Order","offer_id":46173884416283,"sku":"AMPDETONATORSP","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/b8a603eb57225a19d6c619b0038a252f_1.jpg?v=1692032433"},{"product_id":"boss-fs-7-dual-footswitch-fs-7-c01","title":"Boss FS-7 Dual Footswitch","description":"\u003cp\u003eFS-7 is a compact dual footswitch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Each A\/B switch has two selectable modes for latch or momentary, enabling control of a wide range of equipment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual footswitch in a small footprint\u003c\/li\u003e\n\u003cli\u003eLatch\/momentary switching function\u003c\/li\u003e\n\u003cli\u003eDurable steel chassis\u003c\/li\u003e\n\u003cli\u003eBattery-free operation ideal for pedal boards\u003c\/li\u003e\n\u003cli\u003ePower via 9v adapter (power splitter included)\u003c\/li\u003e\n\u003cli\u003eOperates as momentary switch with no power**\u003c\/li\u003e\n\u003cli\u003eLEDs will not illuminate without AC power\u003c\/li\u003e\n\u003cli\u003eConnectors \u003cstrong\u003eA jack:\u003c\/strong\u003e 1\/4\" TRS phone type (*) \u003cstrong\u003eB jack:\u003c\/strong\u003e 1\/4\" phone type \u003cstrong\u003eDC IN jack*\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eYou can also connect a 1\/4\" phone plug.\u003c\/li\u003e\n\u003cli\u003eIndicators A, B\u003c\/li\u003e\n\u003cli\u003eControls[MODE] switch[POLARITY] switch\u003c\/li\u003e\n\u003cli\u003ePower Supply\u003c\/li\u003e\n\u003cli\u003eAC adaptor (PSA series: sold separately)\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 25\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Boss","offers":[{"title":"New | On Order","offer_id":46173982654747,"sku":"FS7BOSS","price":73.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | On Order","offer_id":49903692087579,"sku":"FS7BOSSRP","price":48.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/fs-7_f_600.jpg?v=1692032518"},{"product_id":"kahayan-8x4-midi-amp-speaker-selector-midi8x4selector","title":"Kahayan 8x4 Midi Amp Speaker Selector","description":"\u003cp class=\"font_8\"\u003e\u003cspan class=\"color_4\"\u003eImagine you could check all your guitar amps with only one guitar chord. Here is the solution. \u003c\/span\u003e\u003cspan class=\"color_11\"\u003eThe Amplifier\/Speaker Selector is a system which allows you to connect 8 amplifiers to 4 speakers, providing the possibility of easily selecting combinations of amplifiers and speakers. Thus avoiding waste of time and making work easier and without quality loss in the signal path.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"font_8\"\u003eThis new version of our classic 8x4 Selector is the result of a lot of work in the improvement and develop our of gear. Now the new selector can be controlled by MIDI pedalboard and any Tablet thru a bluetooth\/MIDI interface. Also incorporate a tune jack output linked to a mute switch and Bus Amp insert.\u003c\/p\u003e","brand":"Kahayan","offers":[{"title":"New | On Order","offer_id":46176322945307,"sku":"MIDI8X4SELECTOR","price":1299.0,"currency_code":"USD","in_stock":true},{"title":"Repack | On Order","offer_id":49918738825499,"sku":"MIDI8X4SELECTORRP","price":798.0,"currency_code":"USD","in_stock":false},{"title":"Pre-Owned | On Order","offer_id":50120912797979,"sku":"C103861","price":749.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/1684499160_1768272.jpg?v=1755888147"},{"product_id":"jhs-pedals-red-remote-redremote","title":"JHS Pedals Red Remote","description":"\u003cp\u003eUse JHS's new Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1\/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting.  The Red Remote is currently compatible with the following JHS Pedals:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMorning Glory V4\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuperBolt V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwin Twelve V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen using the Red Remote, the remote itself will act as the toggle, therefore disabling the pedal's onboard toggle switch.  For example, if you have our Red Remote plugged into the SuperBolt, the SuperBolt's \"GAIN\" toggle will be deactivated and the Red Remote will switch the toggle on\/off as you step on the footswitch.\u003c\/p\u003e\n\u003cp\u003eTo use the Red Remote, plug the remote into the jack of the pedal labeled \"REMOTE...\"  ...this jack will have a red washer to denote it is the appropriate jack to plug the Red Remote into.\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"New | On Order","offer_id":46177718927643,"sku":"REDREMOTE","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | On Order","offer_id":50120989966619,"sku":"C103983","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/jhs-pedals-red_remote.png?v=1692034705"},{"product_id":"marshall-code-stompware-pedl-91009-4-way-footswitch-for-code-amps-m-pedl-91009","title":"Marshall Code Stompware PEDL-91009 4-Way Footswitch for Code Amps","description":"\u003cul\u003e\n\u003cli\u003eCODE Stompware Guitar Amp Footcontroller\u003c\/li\u003e\n\u003cli\u003eThe Marshall CODE Stompware guitar footcontroller gives you complete control over all of your CODE Series amp modeling and effects\u003c\/li\u003e\n\u003cli\u003eThe range offers a choice of digital amp models, power amps, cabinet simulations, FX and more allowing you to dial in every tonal possibility you need\u003c\/li\u003e\n\u003cli\u003eVarious choices of glistening cleans, vintage crunches and modern high gain options can be mixed and matched with classic Marshall 100W or British Class A power stage for example, and then run through a choice of various 1x12, 2x12 or 4x12 simulations\u003c\/li\u003e\n\u003cli\u003eAdd from a selection of 24 FX and you have all you need in one complete setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marshall","offers":[{"title":"New | In Stock (ETA: 3\/19\/2026)","offer_id":46178329887003,"sku":"M-PEDL-91009","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/MPEDL91009_0.jpg?v=1692035118"},{"product_id":"mission-engineering-ep1kpgn-expression-pedal-for-kemper-profiling-amps-ep1-kp-gn","title":"Mission Engineering EP1-KP Green Expression Pedal for Kemper Profiling Amps","description":"\u003cp\u003eThe Mission EP1-KP connects to the Kemper Profiler or Remote with a single TRS cable for expression, and a single TS cable for the toe switch. The switch output may be left unconnected if this function is not required.\u003c\/p\u003e\n\u003cp\u003eThe EP1-KP is compatible with all models of the Kemper Profiler as well as the Remote.\u003c\/p\u003e\n\u003cp\u003eThe EP1-KP is compatible with some non-Kemper devices that support a switching expression pedal with a momentary TS switch. These include current model FAMC Liquid Foot MIDI controllers, and the ISP Theta Pro DSP guitar pre-amp.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePedal dimensions are 10″ x 4″ x 3″\u003c\/li\u003e\n\u003cli\u003eWeight is 3.2lb\u003c\/li\u003e\n\u003cli\u003ePotentiometer is 10K Ohm Linear\u003c\/li\u003e\n\u003cli\u003eSwitch is TS Momentary\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mission Engineering","offers":[{"title":"New | Pre-Order (ETA: 10\/15\/2026)","offer_id":46180269326619,"sku":"EP1-KP-GN","price":169.0,"currency_code":"USD","in_stock":false},{"title":"Pre-Owned | On Order","offer_id":47901882024219,"sku":"EP1-KP-GNEBAYPRO","price":139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/ep1kp.jpg?v=1692036432"},{"product_id":"earthquaker-devices-swiss-things-pedalboard-reconciler-eqsswis","title":"EarthQuaker Devices Swiss Things Pedalboard Reconciler","description":"\u003cp\u003eSwiss Things is an all-in-one pedalboard reconciliation solution designed to really tie your rig together without resorting to some confusing loop-switching contraption bigger than a meatball party sub that eats up the entire bottom row of your board and kind-of-but-not-quite does what you need it to do. \u003c\/p\u003e\n\u003cp\u003eSwiss Things combines two true-bypass Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss. \u003c\/p\u003e\n\u003ch3\u003eThis is what you can do with it:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse as many pedals as you’d like without tone-suck\u003c\/li\u003e\n\u003cli\u003eQuickly and easily bypass all your pedals with one click\u003c\/li\u003e\n\u003cli\u003eUse Flexi-Switch™ Technology with every pedal in your setup\u003c\/li\u003e\n\u003cli\u003eEliminate volume pedal tone-suck by using any expression pedal to control volume\u003c\/li\u003e\n\u003cli\u003eUse multiple amps without phase issues, ground loops, or extra noise\u003c\/li\u003e\n\u003cli\u003eTidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHere’s what the footswitches do:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoop 1: Press this to engage Loop 1. It features Flexi-Switch™ Technology and is unbuffered for use with all distortion, overdrive, and fuzz pedals, or anything else that doesn’t like being buffered. \u003c\/li\u003e\n\u003cli\u003eLoop 2: Press this to engage Loop 2. It also features Flexi-Switch™ Technology and is buffered for use with time-based effects (delay, reverb, modulation, etc.). \u003c\/li\u003e\n\u003cli\u003eNote: when nothing is plugged into Loop 2, it functions as a mute.\u003c\/li\u003e\n\u003cli\u003eBoost: press this to activate the boost. It is Flexi-Switch™ Technology enabled and provides up to 20dB of clean boost post-effects loops and is intended for use as an output booster.\u003c\/li\u003e\n\u003cli\u003eA\/B selects between Output A and Output B. \u003c\/li\u003e\n\u003cli\u003eNote: Output B is transformer-isolated and includes a Phase switch for use with pedals and\/or amplifiers which invert phase.\u003c\/li\u003e\n\u003cli\u003eBoth activates Output A and Output B at the same time and features Flexi-Switch™ Technology.\u003c\/li\u003e\n\u003cli\u003eHere’s what the input, output, send, return, and expression jacks are for:\u003c\/li\u003e\n\u003cli\u003eInput: plug your instrument in here. \u003c\/li\u003e\n\u003cli\u003eIf you have any “always-on” pedals (compressors, preamps, EQs, etc.) place them before Swiss Things’ input. \u003c\/li\u003e\n\u003cli\u003eLoop 1 Send: Plug this into the input of the first pedal in the overdrive\/distortion\/fuzz section of your board.\u003c\/li\u003e\n\u003cli\u003eLoop 1 Return: Plug the output of the last pedal of the overdrive\/distortion\/fuzz section into this jack. \u003c\/li\u003e\n\u003cli\u003eLoop 2 Send: Plug this into the input of the first pedal in the modulation section of your board.\u003c\/li\u003e\n\u003cli\u003eLoop 2 Return: Plug the output of the last pedal of your modulation section into this jack. \u003c\/li\u003e\n\u003cli\u003eTuner Output: Connect this to the input of your tuner. \u003c\/li\u003e\n\u003cli\u003eTo avoid extra noise, your tuner must always be turned on when connected to Swiss Things.\u003c\/li\u003e\n\u003cli\u003eVolume EXP: Connect any expression pedal to this output to control volume. \u003c\/li\u003e\n\u003cli\u003eMost volume pedals create “tone-suck” by loading the signal down and have limited travel. This solves that problem with a buffered output and allows you to use any expression pedal with the same results. The expression jack is placed after the “dirt” effects loop (Loop 1) which allows you to change volume levels without affecting gain.\u003c\/li\u003e\n\u003cli\u003eOutput A: connect this to the input of your amplifier.\u003c\/li\u003e\n\u003cli\u003eOutput B: connect this to the input of a separate amplifier to use multiple amps and\/or to play in stereo.\u003c\/li\u003e\n\u003cli\u003eNote: to use Swiss Things with stereo effects, they should be placed after Outputs A \u0026amp; B and both outputs must be selected using the Both switch. \u003c\/li\u003e\n\u003cli\u003eNote: Output B is transformer-isolated and includes a Phase switch for use with pedals and\/or amplifiers which invert phase.\u003c\/li\u003e\n\u003cli\u003eTo use stereo effects after Swiss Things, do not have the Phase switch engaged otherwise the L \u0026amp; R inputs of your stereo effects will be out of phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDoes it Matter Which Loop I Use?\u003c\/h3\u003e\n\u003cp\u003eYes, it does. Loop 1 is unbuffered and is intended for use with boost, overdrive, distortion, fuzz, etc. Use this loop for vintage pedals and\/or anything with low input impedance that requires direct interaction with your pickups. Loop 2 is buffered and is intended for use with time-based and modulation effects (delay, reverb, chorus, phaser, flanger, etc). When nothing is plugged into Loop 2, it functions as a mute switch.\u003c\/p\u003e\n\u003ch3\u003eQuick Start Guide\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePlace Swiss Things in the top-right corner of your pedalboard.\u003c\/li\u003e\n\u003cli\u003eNote: any mono “always-on” pedals (compressors, preamps, EQs, etc.) should be placed before Swiss Things.\u003c\/li\u003e\n\u003cli\u003eConnect the Loop 1 Send to the input of the first gain pedal in your chain. \u003c\/li\u003e\n\u003cli\u003eConnect the output of the last gain pedal in your chain to the Loop 1 Return.\u003c\/li\u003e\n\u003cli\u003ePlug the Loop 2 Send into the input of the first modulation effect in your chain.\u003c\/li\u003e\n\u003cli\u003ePlug the output of the last modulation effect in your chain into the Loop 2 Return.\u003c\/li\u003e\n\u003cli\u003ePatch the Tuner Output into the input of your tuner.\u003c\/li\u003e\n\u003cli\u003eNote: tuner must be always turned on. If you bypass your tuner, you may experience ground loops or hum. \u003c\/li\u003e\n\u003cli\u003eFor volume control, plug an expression pedal into the Volume EXP jack. \u003c\/li\u003e\n\u003cli\u003eConnect outputs A and\/or B to your amplifier(s).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlexi-Switch™ Technology \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis relay-based, true-bypass switching style allows you to simultaneously use momentary and latching style switching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.\u2028 \u003c\/p\u003e\n\u003cp\u003eFor momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003c\/p\u003e\n\u003cp\u003eSince the switching is relay based, it requires power to pass signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent Draw: 40 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis device takes a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDO NOT RUN AT HIGHER VOLTAGES!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTech Specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Impedance: 1M\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 1K\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EarthQuaker Devices","offers":[{"title":"New | On Order","offer_id":46181539053851,"sku":"EQSSWIS","price":299.0,"currency_code":"USD","in_stock":false},{"title":"Pre-Owned | On Order","offer_id":47103316754715,"sku":"EQSSWISEBAYPRO","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/EQSSWIS_1.jpg?v=1692038009"},{"product_id":"electro-harmonix-nano-signal-pad-passive-attenuator-signalpad","title":"Electro Harmonix Nano Signal Pad Passive Attenuator Pedal","description":"\u003cp\u003eThe Signal Pad is a passive attenuator that allows you to instantly switch to a different preset volume. It's like your guitar's volume knob, with a fully-passive and color-free circuit. Leave your amp's volume set high for overdrive, and use the Signal Pad to lower your level for a clean sound -- then switch it off to kick in your amp's natural overdrive. You can also experiment with the Signal Pad anywhere in your effects chain -- you'll bring out new tonal combinations from your favorite old pedals.\u003c\/p\u003e","brand":"Electro Harmonix","offers":[{"title":"New | In Stock","offer_id":46181556617499,"sku":"SIGNALPAD","price":51.2,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | On Order","offer_id":49383735689499,"sku":"SIGNALPADEBAYPRO","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/signal-pad_6a8aa91c-668a-4cae-8b6c-de2754f8694d.jpg?v=1721069259"},{"product_id":"jhs-pedals-active-aby-pedal-activeaby","title":"JHS Pedals Active ABY Pedal","description":"\u003cp\u003eThe JHS Pedals Active A\/B\/Y is the perfect solution when you need to send one signal to two outputs with the ability to choose either output (or both) on the fly.\u003c\/p\u003e\n\u003cp\u003eJust plug in your instrument cable (or patch cable) into the input, then use the outputs to send signal to any combination of amplifiers, interfaces, mixing board, or anywhere else you want to send your signal.   Once hooked up, use the left footswitch to select between A and B channels. When the LED is red, the A channel is engaged. When the LED is green, the B channel is engaged.  Hit the right “Y” footswitch, and BOTH channels are engaged for full stereo output. Because the Active A\/B\/Y has an output transformer on one of the outputs, there is no need for a ground lift as the transformer eliminates any hum.\u003c\/p\u003e\n\u003cp\u003eWith an output transformer, FET transistors for completely silent switching, the capability to use one or both outputs simultaneously, the JHS Pedals Active A\/B\/Y will be the one pedal that you can never leave home without!\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"New | On Order","offer_id":46181667438875,"sku":"ACTIVEABY","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/jhs-pedals-active_aby_1.png?v=1692038117"},{"product_id":"jhs-pedals-summing-amp-summingamp","title":"JHS Pedals Summing Amp","description":"\u003cp\u003eThe JHS Pedals Summing Amp gives you the ability to take two inputs and blend them into one output.  Simply plug into the two marked inputs and then plug in your single output and you’re ready to go. From two signals the Summing Amp creates one mono signal.\u003c\/p\u003e\n\u003cp\u003eThis is perfect for putting effects in parallel so that they are not affected by one another. The Edge used this technique in the 80s with his delays. When you have a quarter note delay and a dotted eighth delay and you place them in parallel then sum them back together, the effect is that both delays come through more clearly and are not “delaying the delays”. This can also be used with overdrives so that they are not pushing each other as in series, but sit atop one another in parallel. Another use is combining fuzz and compression in parallel so the fuzz isn’t getting choked by the compression.\u003c\/p\u003e\n\u003cp\u003eThe Summing Amp gives you the ability to use effects together in completely new ways that you may never have imagined and can open up new and inspiring sounds with your old effects. This simple little box takes two inputs and creates one output but it adds up to a whole lot more!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"New | On Order","offer_id":46181667995931,"sku":"SUMMINGAMP","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/jhs-pedals-summing.png?v=1692038121"},{"product_id":"jhs-pedals-switchback-switchback","title":"JHS Pedals Switchback","description":"\u003cp\u003eThe JHS Pedals Switchback is a small unassuming box with a massive feature set. It began its life as a device that we designed just for ourselves to test and compare pedals in the JHS workshop but we soon realized that it was extremely useful for everyone’s guitar rig on stage or in the studio.\u003c\/p\u003e\n\u003cp\u003eThe Switchback has one input, one output and two separate selectable effects loops (Send\/Return), plus an A\/B toggle that is controllable by our Red Remote switching system. The foot-switch is 100% true bypass, so when it’s off, it's not affecting your signal in any way. There are millions of ways to use the Switchback (Maybe not a million but… You get the idea) but here are a few of our favorite applications that are incredibly useful!\u003c\/p\u003e\n\u003cp\u003e1. An A\/B True Bypass Looper\u003c\/p\u003e\n\u003cp\u003ePlace a pedal or chain of pedals in the first loop and place a different pedal or chain of pedals in the second loop. The toggle\/red remote will allow you to quickly switch between those two loops. This is great for instantly placing different effects chains in and out of your rig on the fly or for shooting out two pedals with zero dead time in-between playing… Find out if that old TS808 sounds better than your TS-9 :-) if you demo different pedals, this is a must have.\u003c\/p\u003e\n\u003cp\u003e2. A Simple True Bypass Looper\u003c\/p\u003e\n\u003cp\u003ePlace your pedal or chain of pedals that you want in the first loop. The toggle\/Red Remote will now toggle between the loop with your effects and the clean bypass signal. There’s no need to bridge the second loop with a patch cable as the Switchback automatically bypasses any loop where there’s nothing plugged in to the jack.\u003c\/p\u003e\n\u003cp\u003e3. An A\/B Box\u003c\/p\u003e\n\u003cp\u003eSimply use Send 1 and Send 2 to go to two different amps or any other application where you need two switchable outputs, and don’t use the output. Again, using the Red Remote gives you the ability to switch on the fly while playing!\u003c\/p\u003e\n\u003cp\u003e4. An Amp Input Switcher\u003c\/p\u003e\n\u003cp\u003eUse Send 1 to channel one and Send 2 to channel two. This allows you to “channel switch” on any amp with multiple inputs like old Marshalls and Fenders!\u003c\/p\u003e\n\u003cp\u003e5. An Effects Loop A\/B\u003c\/p\u003e\n\u003cp\u003ePlug your amp's effects loop Send into the input and the amps return into the output. Then toggle between the two loops of the Switchback as in example #1 above.\u003c\/p\u003e\n\u003cp\u003eBecause of the red remote function you can place the Switchback and any effects in its loops completely out of sight under your pedal board or in a rack while only having the small 1x1” Red Remote accessible!!!\u003c\/p\u003e\n\u003cp\u003eThe Switchback could become an essential utility in your touring rig or studio, helping you solve many switching puzzles with your rig. So grab a Switchback and get to climbing!\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"New | In Stock","offer_id":46181668618523,"sku":"SWITCHBACK","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | On Order","offer_id":50120989344027,"sku":"C103982","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/jhs-pedals-switchback.png?v=1692038121"},{"product_id":"strymon-multiswtich-plus-z100-mswp","title":"Strymon MultiSwtich Plus","description":"\u003cp\u003eHave you ever wanted instant access to three presets for Sunset or Riverside? Or to unlock the full potential of Volante? Connect MultiSwitch Plus with the included 1\/4″ TRS cable and add a new dimension to your rig.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Control Modes.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMultiSwitch Plus can be configured in several different ways to extend floor control of compatible Strymon pedals. Depending on the selected mode and the pedals connected, you can recall presets, change banks, operate TimeLine’s looper, remotely tap tempos, and more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl up to Three Pedals.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeaturing three outputs, MultiSwitch Plus allows you to connect up to three compatible Strymon pedals using additional TRS cables (sold separately). Now you can engage presets on Sunset, Riverside, and Volante simultaneously. Or mix and match the footswitches to set up your own custom operation—such as controlling tap tempo on your Flint, Favorite on your El Capistan, and Boost on your Riverside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstant Preset Access\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAdd a MultiSwitch Plus to your Sunset, Riverside, or Volante and gain instant access to presets 1, 2, and 3. Or connect all three pedals to MultiSwitch Plus using additional TRS cables (sold separately) to access three synchronized presets on all three pedals simultaneously.\u003c\/p\u003e\n\u003cp\u003e*No Strymon pedals included in this sale*\u003c\/p\u003e","brand":"Strymon","offers":[{"title":"New | On Order","offer_id":46182082838811,"sku":"Z100-MSWP","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/multiswitchplus_topdown_grad_1600.jpg?v=1692038728"},{"product_id":"electro-harmonix-super-switcher-programable-effects-hub-superswitch","title":"Electro Harmonix Super Switcher Programable Effects Hub Pedal","description":"\u003cp\u003eThe Super Switcher, as its name implies, offers a powerful solution for players who are tired of “tap dancing” around their pedalboard. In effect, it moves all of your pedals to your pedalboard’s front row while delivering control of them with one button push. The result is that it puts the player back in control of an unruly pedalboard!\u003c\/p\u003e\n\u003cp\u003eIt’s also perfect for any guitarist using the “four-cable method” because it makes it easy to properly route effects that should go in front of an amp and those that are best in the effects loop.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to live performance, the Super Switcher can efficiently organize presets into banks that are easy to recall and match your show’s set list. If you’re playing to a click track and want to have the presets recalled via MIDI programmed to a song, the Super Switcher can handle that, too. It’s also a great way to sync time-based effects to the same master clock.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtensive I\/O maximizes flexibility and control.\u003c\/li\u003e\n\u003cli\u003eFeatures mono and stereo send\/return, insert send\/return and mono\/stereo out\u003c\/li\u003e\n\u003cli\u003eEquipped with tuner and tap tempo outs, MIDI In \u0026amp; Out and more.\u003c\/li\u003e\n\u003cli\u003eFeatures eight mechanical-relay controlled, true bypass loops.\u003c\/li\u003e\n\u003cli\u003eProvides 128 presets: 16 banks with 8 presets each.\u003c\/li\u003e\n\u003cli\u003eTap footswitch sets the BPM. The Super Switcher can be configured to send\/receive MIDI clock and send tap signals to the output. BPM can be global or per preset.\u003c\/li\u003e\n\u003cli\u003eTuner footswitch sends the input signal to the tuner out and cuts off the signal from any loops or output.\u003c\/li\u003e\n\u003cli\u003eBoost footswitch engages a knob adjustable, output gain Boost on both the left and right channels.\u003c\/li\u003e\n\u003cli\u003eEHX 9.6VDC-200mA power supply included\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 150mA @ 9VDC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Electro Harmonix","offers":[{"title":"New | On Order","offer_id":46182201458971,"sku":"SUPERSWITCH","price":452.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/electro-harmonix-super-switcher-programable-effects-hub_bb5a440e-6fdc-40b8-b919-bc8cef06e515.jpg?v=1721070790"},{"product_id":"kemper-amps-profiler-stage-floorboard-23000000","title":"Kemper Amps Profiler Stage Floorboard","description":"\u003cp\u003eUltimate convenience arrives in the PROFILER™ family! The \u003cstrong\u003eKEMPER PROFILER Stage™\u003c\/strong\u003e combines the acclaimed KEMPER PROFILER digital guitar amplifier with the PROFILER Remote™ — the quintessential foot controller for the PROFILER. \u003c\/p\u003e\n\u003cp\u003eThe PROFILER Stage is no mere accessory — it is a complete PROFILER. It offers the same features and the legendary sound as the well-known Profiler Head and Rack, and even a bit more.\u003c\/p\u003e\n\u003cp\u003eKEMPER PROFILER Stage™ is a multi-effects powerhouse and state-of-the-art guitar amplifier, featuring KEMPER’s unique PROFILING™ technology for capturing the sonic DNA of any guitar amp. It also comes preloaded with a PROFILE™ pool of hundreds of the best guitar amps in the world, created under perfect conditions in professional studios worldwide. \u003c\/p\u003e\n\u003cp\u003eThis combination of PROFILER and Remote allows you to control, administer and program your Performances, as well as manage Rig switches and complex parameter morphs, all in an unparalleled intuitive manner. \u003c\/p\u003e\n\u003cp\u003eThe illuminated sunlight-proof display, which increases display contrast even with the sunlight’s intensity, is designed to be viewed from any distance, under any lighting conditions, and the housing is built like a tank. Just what the doctor ordered for touring musicians on dark stages or sunlit outdoor festivals! \u003c\/p\u003e\n\u003cp\u003eFive buttons allow direct access to five different Rigs per Performance — tap once to select the Rig, and tap again to trigger a morphing. Entire Performances can be switched using a bank system.\u003c\/p\u003e\n\u003cp\u003eFour Effect Buttons can be assigned individually per Rig. Use these to toggle pre- and post amp FX, either singly or in groups, as well as Action \u0026amp; Freeze functions such as Delay Infinity. Setting them up is easier than putting a new contact into your cell phone: click Effect Button, choose FX, assign, done. \u003c\/p\u003e\n\u003cp\u003eDedicated buttons control Tuner Mode and Looper, as well as trigger Tap Tempo or other assignable functions. \u003c\/p\u003e\n\u003cp\u003eUp to four expression pedals can be connected to control continuous parameters of the sound. Alternatively, external switches can be connected for even more toggling functions.  \u003c\/p\u003e\n\u003cp\u003eThe PROFILER Stage™ features dedicated Stereo Monitor Outputs for driving two either full range or standard guitar cabinets simultaneously and independently from the direct stereo feed. Two stereo effect loops with stereo returns for each allow for connecting both pedals and outboard studio effects.\u003c\/p\u003e","brand":"Kemper Amps","offers":[{"title":"Repack | On Order","offer_id":46182656934171,"sku":"23000000RP","price":1477.0,"currency_code":"USD","in_stock":false},{"title":"New | On Order","offer_id":46182656966939,"sku":"23000000","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/23000000_3.jpg?v=1692039563"},{"product_id":"strymon-conduit-midi-hub-conduit","title":"Strymon Conduit MIDI Hub","description":"\u003cp\u003eConduit is a premium, easily configurable, ultra-reliable MIDI interface that will work with just about any quarter-inch MIDI equipped effects pedals you have, and it also offers the best USB computer connection available for any TRS MIDI pedal.\u003c\/p\u003e","brand":"Strymon","offers":[{"title":"Repack | On Order","offer_id":46183547207963,"sku":"CONDUITEBAYPRO","price":132.0,"currency_code":"USD","in_stock":false},{"title":"New | In Stock","offer_id":46183547240731,"sku":"CONDUIT","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/conduit_topdown_hires-scaled_745f03c6-2d58-4450-9d6f-09632c9b4347.jpg?v=1717082262"},{"product_id":"amprx-brownbox-tube-amplifier-input-voltage-attenuator-brownbox","title":"AmpRX BrownBox Tube Amplifier Input Voltage Attenuator","description":"\u003cp\u003eBrownBox was created to provide a safe range of voltage reduction levels for vintage tube amplifier designs. The same, era-correct voltage levels that the amps were designed around. \u003cbr\u003e\u003cbr\u003eThe dynamics of a vintage amp supplied with the proper line voltage are optimized and will sound and respond as originally intended, revealing the circuits true harmonic content. This is the starting point, the basis of the signal chain, and where serious musicians begin creating a signature tone.  \u003cbr\u003e\u003cbr\u003eMost vintage tube amps respond more harmonically and touch sensitive with optimized voltage . Placing these circuits  back into  balance reveals the authentic tone fundamental of the amp, tone that can truly blossom. \u003cbr\u003e\u003cbr\u003eFor the Tube Tone Purist, no pedal or attenuator can come close to replicating the heavenly response of dry, purely saturated tubes. Pedals and attenuators have their place, keeping in mind that they color your tone, not create it.\u003cbr\u003e\u003cbr\u003eEveryone can enjoy multi-dimensional, pure tube tone, if they just know where to start. \u003c\/p\u003e","brand":"AmpRX","offers":[{"title":"New | On Order","offer_id":46183600357659,"sku":"BROWNBOX","price":349.0,"currency_code":"USD","in_stock":false},{"title":"Pre-Owned | On Order","offer_id":48071747240219,"sku":"BROWNBOXEBAYPRO","price":319.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/shopify_product_graphics_10.webp?v=1725642325"},{"product_id":"boss-ev-1-wl-wireless-midi-expression-pedal-ev-1-wl","title":"Boss EV-1-WL Wireless MIDI Expression Pedal","description":"\u003cp\u003eTake command of your MIDI music gear with the BOSS EV-1-WL, the world’s first wireless MIDI expression pedal. The EV-1-WL provides wireless foot control for BOSS products such as the EURUS GS-1, Waza-Air, and Katana-Air music apps on mobile devices, and anything that can receive CC messages via Bluetooth® MIDI. In addition, USB and MIDI TRS connectivity are on hand for wired control of computer music software and standard MIDI devices. Whether you go wireless or wired—or both at once—the EV-1-WL delivers a ton of MIDI power in a compact footprint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpand Your Performance Range with Bluetooth\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EV-1-WL is the ideal creative partner for the growing range of music performance hardware with Bluetooth wireless support. Use it to control pitch bend, filter, and other synth functions in the BOSS EURUS GS-1  guitar. Or add external footswitches to create a  mini Bluetooth pedalboard for patch selection, wah\/volume control, and more in the Waza-Air and Katana-Air wireless guitar amp systems. The EV-1-WL can also communicate wirelessly with a standard 5-pin MIDI device that has the Roland WM-1 Wireless MIDI Adaptor installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWireless MIDI Control for Computers and Mobile Devices\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePair the EV-1-WL via Bluetooth with Mac computers, smartphones, and tablets to interface with music apps that support remote operation with MIDI CC messages, from guitar amp simulators and effects to virtual instruments and music production software. And if you’re a Windows user, you can add a Roland WM-1D dongle for wireless communication with the EV-1-WL. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play via USB\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EV-1-WL also works as a standalone USB MIDI controller for music software on Mac or Windows computers. The class-compliant interface means there are no drivers to install—simply plug in with a USB cable and configure your software as needed for external MIDI input.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl MIDI Stompboxes, Multi-Effects, and More\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith its space-saving TRS MIDI output, the EV-1-WL is a powerful accessory for all types of MIDI music hardware, from effect pedals and multi-effects processors to keyboards, drum machines, and beyond. Use a TRS-to-TRS cable with mini plugs to connect with BOSS pedals equipped with TRS MIDI, including 200 series effects and the RC-5 and RC-500 Loop Stations. Or grab the BOSS BMIDI-5-35 cable to connect with any device that has a standard 5-pin MIDI input jack.    \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeep Customization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe free EV-1-WL Editor app for iOS and Android devices lets you customize MIDI CC assignments for the EV-1-WL’s pedal, toe switch, and up to two external footswitches. The Bluetooth, USB, and TRS MIDI outputs support simultaneous operation, and you can create independent control settings for each. It’s also possible to set the switches for momentary or latching operation, adjust the pedal’s response curve, and more. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Boss","offers":[{"title":"New | On Order","offer_id":46183628243227,"sku":"EV-1-WL","price":186.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | On Order","offer_id":47103354634523,"sku":"EV-1-WLEBAYPRO","price":139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/ev-1-wl_dw.jpg?v=1692042298"},{"product_id":"voodoo-lab-hex-true-bypass-6-loop-audio-switcher-hexswitcher","title":"Voodoo Lab HEX True Bypass 6-Loop Audio Switcher","description":"\u003cp\u003eImagine being able to instantly reconfigure your entire rig with the touch of a single button. Now you can! And, you aren't limited to just MIDI processors. With the addition of a GCX Guitar Audio Switcher, you can also control all your stompbox and rack effects, select amp channels, and more. The Ground Control Pro can simultaneously control up to 8 different MIDI devices, each on their own channel. And, you can assign 8 of its buttons for instant access of GCX loops and processor functions. This gives you stompbox style control over your processor or modeling amp's internal effects.\u003c\/p\u003e","brand":"Voodoo Labs","offers":[{"title":"New | On Order","offer_id":46183793754395,"sku":"HEXSWITCHER","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/81cm9s6pipl._ac_sl1500.jpg?v=1692042590"},{"product_id":"fender-gtx-7-footswitch-0994072000","title":"Fender GTX-7 Footswitch","description":"\u003cp\u003eThe GTX-7 Footswitch was developed for use with Mustang GTX amplifiers, allowing users to select various presets and effects from the floor. Looper buttons access the amp’s “Record,” “Play,” “Overdub,” “Stop” and “Undo” functions, Tap Tempo is accessible for time-based effects, and the chromatic tuner is also selectable on demand. Removable cable with 1\/4\" plugs included.\u003c\/p\u003e","brand":"Fender","offers":[{"title":"New | On Order","offer_id":46183850148123,"sku":"0994072000","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/fender-gtx-7-footswitch.jpg?v=1692042677"},{"product_id":"strymon-multiswitch-plus-multiswitchplus","title":"Strymon Multiswitch Plus for Sunset, Riverside, Volante, Iridium","description":"\u003ch3\u003eExtended Control for Compadre, Iridium, NightSky, Riverside, Sunset, Volante, and More.\u003c\/h3\u003e\n\u003cp\u003eWant instant access to three presets for Compadre, Iridium, Riverside, or Sunset? Or to unlock the full potential of NightSky or Volante? Connect MultiSwitch Plus with the included 1\/4″ TRS cable and add a new dimension to your rig.\u003c\/p\u003e\n\u003ch3\u003eMultiple Control Modes.\u003c\/h3\u003e\n\u003cp\u003eMultiSwitch Plus can be configured in several different ways to extend floor control of compatible Strymon pedals. Depending on the selected mode and the pedals connected, you can recall presets, change banks, operate TimeLine’s looper, remotely tap tempos, and more.\u003c\/p\u003e\n\u003ch3\u003eControl up to Three Pedals.\u003c\/h3\u003e\n\u003cp\u003eFeaturing three outputs, MultiSwitch Plus allows you to connect up to three compatible Strymon pedals using additional TRS cables (sold separately). Now you can engage presets on three compatible pedals simultaneously (Compadre, Iridium, Riverside, Sunset, and Volante). Or mix and match the footswitches to set up your own custom operation—such as controlling tap tempo on your Flint, Favorite on your El Capistan, and Boost on your Riverside.\u003c\/p\u003e\n\u003ch3\u003eInstant Preset Access\u003c\/h3\u003e\n\u003cp\u003eAdd a MultiSwitch Plus to your Compadre, Iridium, Riverside, Sunset, or Volante and gain instant access to presets 1, 2, and 3. Or connect three pedals to MultiSwitch Plus using additional TRS cables (sold separately) to access three synchronized presets on three pedals simultaneously.\u003c\/p\u003e\n\u003ch3\u003eExtend Volante Functionality\u003c\/h3\u003e\n\u003cp\u003eConnect MultiSwitch Plus to Volante for additional footswitchable control. Use MultiSwitch Plus for remote operation of the SPEED switch, remote transport control, or for additional foot control while in Sound on Sound mode.\u003c\/p\u003e","brand":"Strymon","offers":[{"title":"Pre-Owned | In Stock","offer_id":46184578187547,"sku":"MULTISWITCHPLUSEBAYPRO","price":115.0,"currency_code":"USD","in_stock":true},{"title":"New | In Stock","offer_id":46184578220315,"sku":"MULTISWITCHPLUS","price":129.0,"currency_code":"USD","in_stock":true},{"title":"New - Version: FBA | On Order","offer_id":49494351544603,"sku":"MULTISWITCHPLUSFBA","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/multiswitchplus_topdown_hires.jpg?v=1692043910"},{"product_id":"morley-aby-selector-and-combiner-369707","title":"Morley ABY Selector and Combiner","description":"\u003cp\u003eThe Morley ABY is heralded as the industry standard ABY Switching Device for it's well-built and robust design. It's flexible routing allows you to route one input into two outputs or two inputs into one output giving you many useful options to route your signal. It's Passive circuitry also doesn't require power to function (only the LEDs require power). A reliable ABY switcher is a must-have for any musician's tool kit.\u003c\/p\u003e","brand":"Morley","offers":[{"title":"New | On Order","offer_id":46184641069339,"sku":"369707","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/61_abkaycnl._ac_sl1500__1.jpg?v=1692044232"},{"product_id":"fender-2-button-footswitch-channel-select-effects-on-off-with-1-4-jack-0071359000","title":"Fender 2-Button Footswitch: Channel Select \/ Effects On\/Off with 1\/4\" Jack","description":"\u003cp\u003eRestore your contemporary Fender amp’s footswitch functionality with a genuine replacement Fender footswitch.\u003c\/p\u003e","brand":"Fender","offers":[{"title":"New | In Stock","offer_id":46184754675995,"sku":"0071359000","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/71iqdltio6l._ac_sl1500.jpg?v=1692044743"},{"product_id":"boss-ga-fc-ex-foot-controller","title":"Boss GA-FC EX Foot Controller","description":"\u003cp\u003eThe GA-FC EX provides expanded foot control functionality for select BOSS amplifier models. It maintains the simple setup and intuitive workflow of the standard GA-FC while offering additional functions for greater performance flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Power and Flexibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe GA-FC EX builds on the standard GA-FC with several enhanced features. Status LEDs with two colors make it easier to see changes when switching. And along with two dedicated expression pedal jacks, there’s an additional control jack with a three-way mode selector. It allows you to connect a third expression pedal or use the GA-FC EX for expanded applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Performance Control for Katana MkII Amps\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe mode selector on the GA-FC EX opens up powerful control capabilities with supported Katana MkII models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDouble Your Footswitches\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSet the mode switch to EXPAND and connect an additional GA-FC EX or a standard GA-FC for even more floor control. With twice the footswitches, you have instant access to all memories and effects at once. \u003cbr\u003eOperate Two Amps\u003cbr\u003eIf you use two Katana MkII amps in your setup, FOOT CONTROL 2 mode is for you. Connect one GA-FC EX via two cables to select memories and effects on both amps, either together or independently.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"New | In Stock","offer_id":46186368827675,"sku":"GA-FCEX","price":164.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | In Stock","offer_id":49558013673755,"sku":"GA-FCEXEBAYPRO","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/ga-fc_ex_f.jpg?v=1692046240"},{"product_id":"behringer-fcb1010-midi-foot-controller-fcb1010-c01","title":"Behringer FCB1010 MIDI Foot Controller","description":"\u003cp\u003eOnly from Behringer, the FCB1010 MIDI foot controller is a truly “universal” tool in every sense of the word. Packed with 2 expression pedals and 10 banks of user-programmable presets, the chances are you’ll run out of applications before the FCB101 runs out of space. Equally well equipped for use with guitar, keyboards, or software, each bank can handle 10 presets with up to 5 MIDI program change commands and 2 MIDI controllers per preset - or you can simply use them to switch channels of your guitar amplifier. \u003cbr\u003e\u003cbr\u003eEach well-spaced, easy-to-identify foot control is built for silent operation and tough enough to withstand years of being “kicked around” on the road. The ability to receive future software updates also adds to the service life. A bright LED digital control and large font footswitch indicators allow users to easily identify, program, or tweak presets on the fly, even while standing.\u003c\/p\u003e","brand":"Behringer","offers":[{"title":"Repack | On Order","offer_id":46242328936731,"sku":"FCB1010EBAYPRO","price":118.0,"currency_code":"USD","in_stock":false},{"title":"New | On Order","offer_id":47356989833499,"sku":"FCB1010","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/FCB1010.jpg?v=1711996925"},{"product_id":"livemix-fp-2-foot-pedal-lm-fp-2","title":"LiveMix FP-2 Foot Pedal","description":"\u003cp\u003eThe FP-2 is a multi-function foot pedal allowing hands-free control of key CS-SOLO and CS-DUO features. The FP-2 allows musicians and performers to make channel selections and mix adjustments without taking their hands off their instruments or microphones. By tapping or holding each button, users can select channels, adjust volumes and activate the built-in intercom on the personal mixer. When using a CS-DUO, select “MIX A” or “MIX B” on the FP-2. By connecting two FP-2 units together, both mixes on the CS-DUO can be controlled.\u003c\/p\u003e","brand":"Livemix","offers":[{"title":"0 | On Order","offer_id":47041956479259,"sku":"LM-FP-2","price":75.0,"currency_code":"USD","in_stock":true},{"title":"New | On Order","offer_id":49527221518619,"sku":"LM-FP-2","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/fp2-top.jpg?v=1697448864"},{"product_id":"fender-switchboard-effects-operator","title":"Fender Switchboard Effects Operator","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUnleash the full potential of your pedal board! The Switchboard Effects Operator is a streamlined and compact effects switching solution with a remarkably simple interface, bringing complete signal path control, multi-pedal preset recall, and convenient effects switching right to your feet.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDesigned in collaboration with Ron Menelli, the premier loop switching expert called on by the pros, the Switchboard utilizes five rearrangeable relay true bypass effects loops combined with a powerful processor to intuitively reroute your pedal board - all while maintaining a completely analog, high-fidelity signal path. Use the Switchboard to access any combination of pedals in any order, toggle multiple or individual effects on and off, and even control your amp’s footswitches and MIDI enabled pedals.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDon’t bog down your tone workflow with complicated menus; the Switchboard’s graphic user interface and easy-to-use encoder knob makes crafting presets in real time straightforward and fun. The full color LCD screen displays bold visual graphics, so you always know what pedals are on and what preset is currently active. Packed with 500 user presets, a built-in professional tuner, two high fidelity buffers, a built-in volume pedal and much more, the Switchboard provides pro-level board control in a user-friendly package.\u003c\/p\u003e\n\u003cul class=\"feature-bullets-list\" id=\"first-instance-shown-feature-bullets\" _ngcontent-iyk-c334=\"\"\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003e5 relay true bypass effects loops\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003e400 easily accessible presets with an additional 100 favorite presets\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003eLarge, full color LCD screen and Encoder knob provide easy-to-use graphic UI\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003eCompletely rearrangeable effects loop order\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003eProgramable footswitch and MIDI outputs for controlling outboard gear\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003eIntegrated professional tuner\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003eBuilt-in moveable volume pedal\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003eSwitchable high-fidelity input and output buffers\u003c\/li\u003e\n\u003cli _ngcontent-iyk-c334=\"\"\u003eStereo capable loop 5 can host stereo effects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fender","offers":[{"title":"New | On Order","offer_id":47694810579227,"sku":"0235150000","price":569.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/0235150000_fen_pdl_dtl_4_nr.png?v=1706020394"},{"product_id":"mxr-m231-trs-split-tap","title":"MXR M231 TRS Split + Tap","description":"\u003cp\u003eThe MXR Split + Tap is a compact footswitch that combines a passive TRS splitter with a responsive tap tempo control, all in a single compact-yet-robust unit.\u003c\/p\u003e\n\u003cp\u003eWant to direct your sound to two different places, like separate amplifiers or recording equipment? Are you looking to combine two signals into one? The Split + Tap has you covered thanks to a TRS input and Left and Right outputs, all passive, allowing you to split your TRS signal to mono L\/R paths or combine stereo L\/R paths into a TRS path. The Split + Tap also allows you to adjust the timing of your effects or toggle their parameters on the fly with a momentary switch that responds quickly to your touch.\u003c\/p\u003e\n\u003cp\u003eGet the MXR Split + Tap for versatile signal setups and dynamic performances.\u003c\/p\u003e\n\u003c!----\u003e","brand":"MXR","offers":[{"title":"New | In Stock","offer_id":48923701281051,"sku":"M231","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/81XUGjXM8sL._AC_SL1500.jpg?v=1717700985"},{"product_id":"whirlwind-remote-with-stomp-box-style-footswitch","title":"Whirlwind Remote with Stomp Box-Style Footswitch","description":"\u003cdiv\u003e\n\u003cp\u003e*Please note  -- This pre-owned item may show signs of use. Please see the photos for details.\u003c\/p\u003e\n\u003cp\u003eAn innovative and high-quality solution for your audio needs, the Whirlwind MultiSelector Footswitch Remote Control is a versatile tool designed for seamless integration with the MultiSelector AMP. This durable remote control features a \"stomp box\" style design, housing four user-friendly footswitches that allow for effortless control of your rack mount units from a distance.\u003c\/p\u003e\n\u003cp\u003eConstructed to work exclusively with the MultiSelector AMP, this remote control requires a standard 3-pin XLR microphone cable, making it compatible with a wide array of audio equipment. Its unique, proprietary communication protocol ensures reliable switching even with microphone cables extending up to 100 feet long.\u003c\/p\u003e\n\u003cp\u003eWhether you're using bass pedals or guitar pedals, the Whirlwind MultiSelector Footswitch Remote Control offers you the convenience of controlling your MultiSelector AMP remotely. This innovative product is an essential addition to any professional audio setup, providing you with the versatility and control you need to deliver the best sound experience.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Whirlwind","offers":[{"title":"Pre-Owned | On Order","offer_id":49900584993051,"sku":"MLTSELAMPREBAYPRO","price":226.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/4K0A9748878.jpg?v=1738081992"},{"product_id":"boss-xs-100-poly-shifter","title":"Boss XS-100 Poly Shifter","description":"\u003cp class=\"p1\"\u003eThe XS-100 Poly Shifter redefines pedal-based pitch shifting with groundbreaking BOSS technology years in the making. Delivering natural sound, precision tracking, and deep customization options, this powerhouse expression machine transforms how you perform with pitch. Glide up or down four full octaves with the ultra-smooth pedal to infuse your music with evocative new colors. Enhance solos by triggering bold shifts with a single footswitch press. Instantly retune your instrument with drop tunings, capo simulations, and more. And with onboard memories, your favorite setups are always ready when you need them.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eNatural Sound with Advanced BOSS Technology\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eIn developing the XS series, BOSS engineers pioneered new methods to advance real-time pitch shifting and eliminate the tonal artifacts common in conventional designs. Powered by finely tuned algorithms and a specially selected DSP platform, the XS-100 provides balanced polyphonic performance that feels natural and musical across all playing styles, pickup positions, and pedal setups. Your instrument’s attack and tonal character are fully preserved, and even complex chords and sustained lead tones—typically a challenge for pitch shifters—are reproduced with stunning clarity.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cb\u003eTotal Pitch Control\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eWith the XS-100 underfoot, you’re in full command of nearly any pitch effect imaginable. The responsive pedal offers linear control of four octaves up or down, and independent pitch-change speeds for each pedal direction make it easy to produce motor revving tones and other interesting effects. At the end of the pedal’s travel, you can use the integrated toe switch to introduce momentary pitch jumps with adjustable range and rise\/fall time. Two footswitches are also available to bypass the pedal shift and quickly retune your instrument at fixed semitone steps across eight octaves.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cb\u003eCustomize and Save\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe XS-100 gives you the tools to shape pitch effects with precision and personality. Customize the pedal’s range for different songs or techniques and fine-tune the response curve to suit your playing style. Freely reassign the toe switch and footswitches to alternate functions. Craft rich doubling effects with the detuning option and explore many other ways to refine your sound. Once everything’s dialed in, save your setup to one of 30 memories for instant recall during live sets or studio sessions.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cb\u003eIntegrate with Every Rig\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eFilled with flexible connectivity, the XS-100 flows with every performance setup. Up to two external footswitches or an expression pedal are supported, expanding your real-time control options. MIDI I\/O opens the door to more advanced applications, from external MIDI control to sending MIDI commands with the pedal and footswitches. There’s also a secondary output that mirrors the input signal, providing parallel routing flexibility for sophisticated rigs.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"New | In Stock","offer_id":51076479025435,"sku":"XS-100","price":349.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | In Stock","offer_id":52285013197083,"sku":"XS-100EBAYPRO","price":278.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/XS-100_top.jpg?v=1758651869"},{"product_id":"fender-ltx-5-footswitch","title":"Fender LTX-5 Footswitch","description":"\u003cp\u003eTake command of your tone with the professional-grade LTX-5 Button Footswitch, your direct link to the full potential of the Mustang® LTX 50 and 100 watt amplifiers. This footswitch delivers intuitive control and instant access to your favorite presets and effects, all in a road-ready design that's built for the stage.\u003c\/p\u003e\n\u003cp\u003eInstantly recall your favorite tones with easy bank navigation and direct preset access in Preset Mode. Effects Mode allows you to take control of your effect chains with dedicated switches for Stomp, Modulation, Delay, and Reverb. Instantly engage or bypass effects for real-time tone shaping. Tap Tempo is available in Preset mode and an onboard tuner can be accessed with the Mode switch that mutes the signal and displays the tuning on the six-character LED display.\u003c\/p\u003e","brand":"Fender","offers":[{"title":"New | In Stock","offer_id":51105138639131,"sku":"0994073000","price":129.99,"currency_code":"USD","in_stock":true},{"title":"Pre-Owned | In Stock","offer_id":51628951732507,"sku":"0994073000EBAYPRO","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/0994073000_fen_acc_frt_1_nr.jpg?v=1759246135"},{"product_id":"dunlop-cry-baby-bb535-multi-wah-reissue","title":"Dunlop Cry Baby BB535 Multi-Wah Reissue Pedal","description":"\u003cp\u003eThe Cry Baby BB535 Wah Reissue is a recreation of the first commercially available modded wah. First released in 1994, the original BB535 redefined what a Cry Baby Wah could be and set the stage for every model that followed. Extensive collaboration with some of the world’s top guitarists allowed us to give players the power to shape their own sound, for the first time, with no more than a single pedal at their feet. With a frequency selector, built-in boost, and custom inductor tuned for a warm, vocal tone, the BB535 was the collective voice of a new era of wah, refined for the modern age.\u003c\/p\u003e\n\u003cp\u003ePlayers still chase that sound, and pros scour the world for original models to maintain spare stock for the road. The Cry Baby BB535 Wah Reissue is an authentic restoration of the expressive, throaty growl and hands-on control that made the earlier version a cult classic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrom the Stage to the Workshop\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Cry Baby BB535 Wah may have hit the market in 1994, but its story began years earlier in our workshop, where we’d been digging into every part and parameter to unlock the true potential of the wah pedal. The Jimi Hendrix Cry Baby Wah was the first proof that an artist’s sound could be reverse-engineered and recreated. But our experimentation deepened as we hit the road with bands at the vanguard of a new heavy rock movement in the early ’90s, gathering firsthand feedback from the guitar players who brought the wah pedal back into the grammar of popular music. They all wanted the same thing: quieter operation and a throatier sound that retained the natural character of their guitar’s voice.\u003c\/p\u003e\n\u003cp\u003eEach point of feedback led to another tweak as our workshop started to feel more and more like a custom mod shop. Finally, we decided that it was time to make the ultimate Cry Baby Wah.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering Expression\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn every detail, the Cry Baby BB535 Wah grew out of the knowledge we gained turning artist requests into actual circuit designs. We started by adding a high-impedance input buffer, a lesson taken from the Jimi Hendrix wah that we’d later extend to the entire line. This change allowed greater retention of highs and lows that artists said were being lost when they engaged the effect. Next, we turned to the tonal heart of the wah pedal, sourcing military-grade inductors that not only blocked unwanted noise but delivered a warm, vocal response at the sweet-spot inductance of 535 millihenries.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMany Voices in One\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTo make the ultimate Cry Baby Wah, shaped by the combined insights of several top players, flexibility was a must. Building on that foundation, we added an adjustable, switchable boost circuit based on the MXR Micro Amp. This served two purposes: first, it allowed players to better match their instrument’s voice and volume to the wah effect, and second, it added that signature sweetness and character the Micro Amp is famous for.\u003c\/p\u003e\n\u003cp\u003eTo make the BB535 truly versatile, we added a range selector with four frequency options inspired by the signature tones of modern rock’s foundational acts. In 1999, we expanded it to six tonal options, adding two more voices drawn from our vintage collection. The result is a full and expressive palette, from a sharp and aggressive bite to a deep, throaty growl. By the end of the ‘90s, the BB535 had become a staple for rock ’n’ roll’s top touring acts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Return\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAnd it’s this 1999 version that we’ve decided to bring back. The original Cry Baby BB535 Wah models have developed a cult following over the years, so we dusted off the best-sounding one we had and recreated its circuit part by part to ensure maximum authenticity. We even contacted the original inductor supplier and asked them to start making that special component again. Finally, we equipped the pedal with on\/off LEDs for the wah effect and boost circuit so that you know what’s active at any moment on stage.\u003c\/p\u003e\n\u003cp\u003eNow, you can get your hands—and foot—on the first multi-function wah pedal. Get the Cry Baby BB535 Wah Reissue, and find your voice.\u003c\/p\u003e","brand":"Dunlop","offers":[{"title":"New | In Stock","offer_id":51927130079515,"sku":"BB535R","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/BB535R.MAIN__08494.jpg?v=1774369697"},{"product_id":"tascam-rc-3f-3-way-footswitch","title":"Tascam RC-3F 3-Way Footswitch","description":"\u003cp\u003eThe RC-3F is a 3-way foot switch for the GB-10, LR-10, DP-03 and other TASCAM recorders and players. The 2.5mm mini jack plugs into the \"remote\" jack of these TASCAM products to add features like play\/pause, looping or punch in.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Tascam","offers":[{"title":"Repack | On Order","offer_id":51936435863835,"sku":"RC-3FRP","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/rc3f_right.jpg?v=1774554061"},{"product_id":"line-6-ex2-expression-pedal","title":"Line 6 EX2 Expression Pedal","description":"\u003cp\u003eThe sleek and highly versatile EX2™ expression pedal\/toe switch gives you precise control of volume, wah, pitch, and other effects and parameters, and its cast-aluminum construction ensures reliable performance gig after gig. The EX2 integrates automatically with Helix® Stadium, HX Stomp™\/XL, HX® One, POD® Go, and POD Go Express—just plug it in and play—and independent Pedal\/Toe SW and Toe Switch outputs let you connect it using either a single TRS or two TS 1\/4\" cables. However you configure it, the EX2 provides premium parameter control.\u003c\/p\u003e","brand":"Line 6","offers":[{"title":"New | In Stock","offer_id":52059860402459,"sku":"98-060-0700","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/9049\/3723\/files\/jpeg_1_161c600f-9e86-4a33-b867-4cae2958fd83.jpg?v=1776180543"}],"url":"https:\/\/www.altomusic.com\/collections\/footswitches.oembed?page=2","provider":"Alto Music","version":"1.0","type":"link"}