Our legendary Boogie® Five-Band Graphic EQ is now available in a Pedal! For well over four decades the Boogie Five-Band Graphic EQ has been at the heart of chart topping guitar sounds and it’s hard to ignore the impact its now-classic “V-Curve” has had on modern guitar sounds and popular music. Now we offer this powerful tool in a stand-alone pedal format that packs the same tone-shaping power and hand-built in Petaluma, CA quality as those found in our high-end amplifiers.
In the early ’70s Boogie® sounds were most associated with singing, vocal-inspired lead work as Artists learned the newfound possibilities of its high gain tube preamp and it’s game-changing sustain. The Graphic EQ aboard most fully loaded “Hun-Revs” of the day found their sliders set for a subtle widening effect or enhanced Bass response to mimic bigger cabinets with the little 1x12 combo. As the era of Classic Rock faded and the dawn of Metal appeared on the horizon in the late ‘70s and early ‘80s, the potential power of this on-board tool began to be fully realized. Graphic-loaded MARK II™ Boogies became the norm and most of these on-board EQs were used to scoop the mids to extreme levels while boosting lows and highs and this “V-Curve” became a new standard... the “other sound” (non-Brit) in Hard Rock and Metal.
MESA® Pedals are built by the very same artisans that create the Award Winning Mark Five™ and iconic Dual Rectifier®. These pedals feature the same quality components, craftsmanship and inspiring performance as all of our custom amplifiers. They’re all hand-built in our one and only shop in Petaluma California.... the Home of Tone®! And every MESA pedal is backed by our legendary Customer Service and our long-standing commitment to musicians worldwide since 1969!
Why It Boogies:
"Someone could write a PhD thesis on Mesa/Boogie's scores of user-interfaced tone-shaping circuits and their permutable effects. The simplest, most powerful and iconic of these innovative tools is undoubtedly Mesa's Five-Band graphic equalizer. Developed by Randall Smith in the early Seventies, the circuit features a quintet of frequency sliders that lets players morph a Mesa amp's response far beyond what can be achieved with the tone knobs alone."Erik Kirkland - Guitar World
Check out some Rock tones with the Mesa Boogie 5 Band EQ!
Some Modern Rectifier tone shaping!
A Baritone guitar with clean & drive settings!
|Name||Mesa Boogie 5-Band Graphic EQ|
|Shipping Option||Free Shipping on orders over $94.72|
Designed and Handcrafted in Petaluma, California, USA
True Bypass On/Off Switching - Bypasses all circuitry when off to ensure no tonal loss
Input Level Control provides Unity Gain Detent and ability to boost by +6db or cut by -40db
Output Level Control provides Unity Gain Detent and ability to boost by +6db or cut by -40db
Slider Controls provide Mesa’s legendary tone-shaping power with +/- 12db of boost or cut at 80Hz, 240Hz, 750Hz, 2.2Khz and 6.6Khz
On/Off Status LED
9V Battery Powered or Externally Powered (optional) via External Power Jack Input
Input & Output Jacks (Nominal Input -20db)
Dimensions (W/D/H): 5.78" x 4.76" x 2.30" (146.8mm x 121mm x 58.4mm)
Weight: 1.6lbs (725.7g) with battery, 1.5lbs (680.4g) without battery
True Bypass Switching
Battery Type: 9VDC (one)
Power Consumption (Current Draw): 9VDC/25mA
Input Impedance: 1M Ohm (500k Ohm minimum)
Output Impedance: 10k Ohm
External Power Supply (Not Included):
WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9VDC with a NEGATIVE CENTER plug polarity and a jack plug size of 2.1mm x 5.5mm.
Ask an Expert
Mesa Boogie 5-Band Graphic EQ
Be the first to review this product!
Warning: This product can expose you to chemicals including fakeacholorine, which is known to the State of California to cause cancer or birth defects or other reproductive harm.. For more information, go to www.P65Warnings.ca.gov.