- Details
- Features
- Reviews
ADAM S7A MK2 Main Monitor, 4-Way System, 2x15" Woofer
The ultimate main monitors
The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAM’s main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.
Advanced D‘Appolito-array
The arrangement of the seven discrete loudspeakers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitor’s new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:
There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120 dB are handled without offending the ear.
Impulse Coupling
In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff 25 mm thick aluminum honeycomb plate, which is acoustically dead - thereby providing an extremely mechanically stable bridge to the cabinet (IC). As the drivers are much better fixed this way their time behavior (and consequently their clarity) is audibly and measurably improved.
Amplifiers
Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies. These are combined in an extremely powerful (1000 and 1500 W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs. The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.
The front panel
Numerous controls on the front panel introduce a new degree of control for main monitors.
Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200HZ) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.
In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.
Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.
S7A Mk2
The S7A Mk2 is the ‘big brother’ of the S6X and ADAM’s most spectacular studio monitor to date. With a whopping combined 1500 W of onboard power (rms), this monitor reaches SPL peaks of 128 dB at a distance of 1 meter. The big bass diaphragms produce even more volume even at lowest pitches down to 20 Hz.
Both 15” subwoofers are driven by 500 W rms each, while 250 W rms units are powering all the other frequency bands.
The benchmark
Quite simply, we feel that the S7A Mk2 is the benchmark of what is possible in the state of the art full range active professional monitoring. It incorporates all of the ADAM inventions and designs, as well as the best materials available. This fusion of power and capacity with precision and accuracy results in unparalleled performance in professional monitoring.
The S7A Mk2 is ADAM’s contribution to the best possible studio monitor available. The proof is in the listening – we encourage you to hear for yourself.
Subwoofer
Number 2
Basket Ø 15" (380 mm)
Voice coil Ø 4" (100 mm)
Cone material Paper
Woofer
Number 2
Basket Ø 9" (228 mm)
Voice coil Ø 2" (50 mm)
Cone material HexaCone
Midrange
Number 2
Type X-ART
Cone material HexaCone
Diaphragm area 26 inch² (16800 mm²)
Equiv. Diaphragm Ø 5.5" (146 mm)
Velocity transform ratio 3.5:1
Diaphragm weight 0.7 g
Tweeter
Number 1
Type X-ART
Diaphragm area 4 inch² (2420 mm²)
Equiv. Diaphragm Ø 2" (56 mm)
Velocity transform ratio 4:1
Diaphragm weight 0.17 g
Built-in Amplifiers
Subwoofer 1
Type PWM
Amp. power RMS / music 1000 W / 1400 W
Subwoofer 1
Type PWM
Amp. power RMS / music 500 W / 700 W
Woofer 1
Type PWM
Amp. power RMS / music 500 W / 700 W
Woofer 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Midrange 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Tweeter 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Control panel
Input Sensitivity ±10 dB
EQ 80 Hz (Quality / Hz / Level) 3 x 0.2 - 20 / 20 - 200 / ±12 dB
High Shelf EQ > 6 kHz ±6 dB
Low Shelf EQ < 150 Hz ±6 dB
Sub Gain ±4 dB
Mid-Woofer Level ±2 dB
Mid level ±2 dB
Tweeter gain ±4 dB
Input connectors
Analog XLR
Location Front / Rear switchable
General data
Panel Front
X-Curve-Filter yes
Frequency response 20 Hz - 50 kHz
THD > 80 Hz ≤0.5 %
Long term output ≥128 dB
Max. peak ≥138 dB
Crossover frequencies 65 / 800 / 3100 Hz
Input impedance 10 KOhm
Weight 575.4 lb (261 kg)
Height x Width x Depth 35.5" (900 mm) x 47" (1200 mm) x 26.5" (670 mm)
Warranty 5 Years
Delivery contents
Power cord, Manual
| Product Name | Adam Audio S7A MK2 Main Monitor, 4-Way System, 2x15" Woofer |
|---|---|
| Brand | ADAM Audio |
| Condition | New |
| UPC | 4260110440011 |
| Shipping Option | Free Shipping to the Continental U.S. |
X-ART tweeter, handmade in Berlin
- Allows longer operation with fewer signs of fatigue
- Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
- Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane
- Direct, fast response in the high-range even with complex transients
Ultra-light but extremely dimensionally stable woofer material
- Excellent transient response even at high sound levels without breakup of the diaphragm
4-way system with 2 x 15" woofer and 2 x 9” midrange
- Very high resolution of the stereo image and extremely wide stereo base
Spacious bass reflex ports on the front
- Bass reproduction with very low compression
Highly efficient PWM amplifiers
- Low-distortion amplification at both low and high volume levels
Linear frequency response of 20 Hz to 50 kHz
- Unbiased reproduction in a wide frequency band
Maximum peak sound pressure per pair in 1 m ≥ 138 dB
- Powerful, compression-free sound reproduction even at very high sound levels
Sophisticated room acoustic adjustments
- Allows optimal adaptation to acoustically difficult listening environments or individual preferences
Analog XLR input
- Optimized for balanced line signals
Directional sound radiation in vertical plane
- Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
2 years warranty with optional extension to 3 years with the registration of the product
- Full repair service if required for 5 years
Adam Audio S7A MK2 Main Monitor, 4-Way System, 2x15" Woofer
Details
ADAM S7A MK2 Main Monitor, 4-Way System, 2x15" Woofer
The ultimate main monitors
The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAM’s main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.
Advanced D‘Appolito-array
The arrangement of the seven discrete loudspeakers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitor’s new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:
There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120 dB are handled without offending the ear.
Impulse Coupling
In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff 25 mm thick aluminum honeycomb plate, which is acoustically dead - thereby providing an extremely mechanically stable bridge to the cabinet (IC). As the drivers are much better fixed this way their time behavior (and consequently their clarity) is audibly and measurably improved.
Amplifiers
Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies. These are combined in an extremely powerful (1000 and 1500 W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs. The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.
The front panel
Numerous controls on the front panel introduce a new degree of control for main monitors.
Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200HZ) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.
In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.
Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.
S7A Mk2
The S7A Mk2 is the ‘big brother’ of the S6X and ADAM’s most spectacular studio monitor to date. With a whopping combined 1500 W of onboard power (rms), this monitor reaches SPL peaks of 128 dB at a distance of 1 meter. The big bass diaphragms produce even more volume even at lowest pitches down to 20 Hz.
Both 15” subwoofers are driven by 500 W rms each, while 250 W rms units are powering all the other frequency bands.
The benchmark
Quite simply, we feel that the S7A Mk2 is the benchmark of what is possible in the state of the art full range active professional monitoring. It incorporates all of the ADAM inventions and designs, as well as the best materials available. This fusion of power and capacity with precision and accuracy results in unparalleled performance in professional monitoring.
The S7A Mk2 is ADAM’s contribution to the best possible studio monitor available. The proof is in the listening – we encourage you to hear for yourself.
Subwoofer
Number 2
Basket Ø 15" (380 mm)
Voice coil Ø 4" (100 mm)
Cone material Paper
Woofer
Number 2
Basket Ø 9" (228 mm)
Voice coil Ø 2" (50 mm)
Cone material HexaCone
Midrange
Number 2
Type X-ART
Cone material HexaCone
Diaphragm area 26 inch² (16800 mm²)
Equiv. Diaphragm Ø 5.5" (146 mm)
Velocity transform ratio 3.5:1
Diaphragm weight 0.7 g
Tweeter
Number 1
Type X-ART
Diaphragm area 4 inch² (2420 mm²)
Equiv. Diaphragm Ø 2" (56 mm)
Velocity transform ratio 4:1
Diaphragm weight 0.17 g
Built-in Amplifiers
Subwoofer 1
Type PWM
Amp. power RMS / music 1000 W / 1400 W
Subwoofer 1
Type PWM
Amp. power RMS / music 500 W / 700 W
Woofer 1
Type PWM
Amp. power RMS / music 500 W / 700 W
Woofer 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Midrange 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Tweeter 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Control panel
Input Sensitivity ±10 dB
EQ 80 Hz (Quality / Hz / Level) 3 x 0.2 - 20 / 20 - 200 / ±12 dB
High Shelf EQ > 6 kHz ±6 dB
Low Shelf EQ < 150 Hz ±6 dB
Sub Gain ±4 dB
Mid-Woofer Level ±2 dB
Mid level ±2 dB
Tweeter gain ±4 dB
Input connectors
Analog XLR
Location Front / Rear switchable
General data
Panel Front
X-Curve-Filter yes
Frequency response 20 Hz - 50 kHz
THD > 80 Hz ≤0.5 %
Long term output ≥128 dB
Max. peak ≥138 dB
Crossover frequencies 65 / 800 / 3100 Hz
Input impedance 10 KOhm
Weight 575.4 lb (261 kg)
Height x Width x Depth 35.5" (900 mm) x 47" (1200 mm) x 26.5" (670 mm)
Warranty 5 Years
Delivery contents
Power cord, Manual
| Product Name | Adam Audio S7A MK2 Main Monitor, 4-Way System, 2x15" Woofer |
|---|---|
| Brand | ADAM Audio |
| Condition | New |
| UPC | 4260110440011 |
| Shipping Option | Free Shipping to the Continental U.S. |
Features
X-ART tweeter, handmade in Berlin
- Allows longer operation with fewer signs of fatigue
- Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
- Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane
- Direct, fast response in the high-range even with complex transients
Ultra-light but extremely dimensionally stable woofer material
- Excellent transient response even at high sound levels without breakup of the diaphragm
4-way system with 2 x 15" woofer and 2 x 9” midrange
- Very high resolution of the stereo image and extremely wide stereo base
Spacious bass reflex ports on the front
- Bass reproduction with very low compression
Highly efficient PWM amplifiers
- Low-distortion amplification at both low and high volume levels
Linear frequency response of 20 Hz to 50 kHz
- Unbiased reproduction in a wide frequency band
Maximum peak sound pressure per pair in 1 m ≥ 138 dB
- Powerful, compression-free sound reproduction even at very high sound levels
Sophisticated room acoustic adjustments
- Allows optimal adaptation to acoustically difficult listening environments or individual preferences
Analog XLR input
- Optimized for balanced line signals
Directional sound radiation in vertical plane
- Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
2 years warranty with optional extension to 3 years with the registration of the product
- Full repair service if required for 5 years
Reviews
- Choosing a selection results in a full page refresh.
- Opens in a new window.