
- Details
- Tech Specs
- Reviews
Avantone CR14 Ribbon Microphone with Shockmount and Case
The AVANTONE “Cabernet (C-series)” mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.
The AVANTONE CR-14 is truly a gorgeous looking and sounding microphone. The design, character and performance is comparable to some of the very finest Ribbon mics...but at a fraction of their cost!
Our rugged CR-14 microphone body and inner assembly parts are precision machined of BRASS.
Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and a black grill. The CR-14 has a unique, "retro" body design.
The transformer coupled output will yield pleasing professional results comparable to much more expensive designs.
Any studio can proudly offer the CR-14 as a guitar cabinet, room mic, drum overheads, vocal mic or utility room mic due to its versatility…It exudes class visually as well as sonically.
Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
The versatile CR-14 mic is able to produce professional results with a warm, pleasing sonic character.
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
The CR-14's dual, low-mass ribbon element which enables a much better sensitivity rating than most single ribbon designs. This design lends to fast and accurate transient response, ultra-high 148 dB SPL capability, and overall stunning realism.
The CR-14 has a figure-8 audio directionality (pickup) pattern via front and rear, with extended sweet spots (as compared to Large Diaphragm condenser mics & single ribbon designs).
The CR-14 has very low residual noise, with no internal active electronics to overload or produce distortion. It also requires no power supply.
Uses Include:
- Miking guitar amps & cabinets, acoustic guitar, mandolin, drum overheads, vocals, room mic, etc…
"The CR-14 is a “real deal” ribbon mic with all the natural sound I expect to capture from a classic. It is my new “go to” mic for a warm deep rich tone, rivaling ANY of my vintage classic ribbons."
Ray Kennedy PRODUCER/ENGINEER
(Steve Earle, Ray Davies, Emmylou Harris, Chuck Mead, John Mellencamp, Lucinda Williams)
"When it comes to capturing the sound of an instrument with a lot of mid-presence, the accuracy of the CR-14 is unbeatable...I am using it mainly on saxophone and my Hammond organ, but it also did a remarkable job on my own voice as well as other vocalists...”
Jon Tiven PRODUCER/SONGWRITER
(BB King, Robert Plant, Wilson Pickett, PF Sloan, Howard Tate, etc)
| Product Name | Avantone CR-14 Ribbon Microphone |
|---|---|
| Brand | Avantone |
| Condition | New |
| MPN | CR14 |
| UPC | 852473700105 |
| Shipping Option | Free Shipping to the Continental U.S. |
- TYPE: Ribbon Microphone
- POLAR PATTERN(S): Figure of 8
- RIBBON: Dual Ribbon / Pure Aluminum / 35mm x 5mm / 2 microns thick
- FREQUENCY RESPONSE: 30Hz - 15kHz +/- 3dB
- OUTPUT IMPEDANCE: <=600 Ohms
- RECOMMENDED LOAD: Impedance 3000 Ohms
- SENSITIVITY: -52 dBv +/- 2dB Re. (0dB=1V/Pa)
- S/N RATIO: 70dB re 1Pa
- NOISE FLOOR: < 17 dBA
- MAXIMUM SPL: 145dB (0.5% THD @1000Hz)
- OUTPUT CONNECTOR: Male XLR 3 pins
- POWER REQUIREMENT: None
Avantone CR-14 Ribbon Microphone
| Product Name | Avantone CR-14 Ribbon Microphone |
|---|---|
| Brand | Avantone |
| Condition | New |
| MPN | CR14 |
| UPC | 852473700105 |
| Shipping Option | Free Shipping to the Continental U.S. |
- TYPE: Ribbon Microphone
- POLAR PATTERN(S): Figure of 8
- RIBBON: Dual Ribbon / Pure Aluminum / 35mm x 5mm / 2 microns thick
- FREQUENCY RESPONSE: 30Hz - 15kHz +/- 3dB
- OUTPUT IMPEDANCE: <=600 Ohms
- RECOMMENDED LOAD: Impedance 3000 Ohms
- SENSITIVITY: -52 dBv +/- 2dB Re. (0dB=1V/Pa)
- S/N RATIO: 70dB re 1Pa
- NOISE FLOOR: < 17 dBA
- MAXIMUM SPL: 145dB (0.5% THD @1000Hz)
- OUTPUT CONNECTOR: Male XLR 3 pins
- POWER REQUIREMENT: None
- Choosing a selection results in a full page refresh.
- Opens in a new window.