- Details
- Features
- Tech Specs
- Reviews
Problem? Solution.
Introducing the Buffer++: The ultimate utility pedal. Pristine buffering, plentiful I/O, and advanced signal control. Route anything, adapt on the fly, and preserve every nuance of your carefully dialed-in sound.
Buffer++
The Empress Buffer++ is built for musicians who want total control over their signal path and the freedom to experiment. Whether you’re toggling between inputs, switching amps, summing loops, or doing something no pedalboard was ever meant to do, the Buffer++ has your back.
It builds on our legacy of transparent, low-noise buffers while pushing far beyond simple tone preservation. Unlike rigid switchers or static ABY boxes, you can switch between guitar and synth, convert stereo rigs to mono, or dial in warm, vintage tones, all without touching a single cable. With 12 powerful routing modes, input metering, ground loop rejection, and variable input loading for tone shaping, the Buffer++ makes complex setups simple.
This pedal isn’t just about cleaning up your signal. It’s about unlocking the rig you’ve always wanted to build but didn’t know how. Stop compromising. Start building.
| Product Name | Empress Effects Buffer++ I/O Interface Pedal |
|---|---|
| Brand | Empress Effects |
| Condition | New |
| MPN | BUPP |
| UPC | 850040850413 |
| Shipping Option | Free Shipping to the Continental U.S. |
What's in the Box?
- Empress Effects Buffer++ I/O Interface Pedal
- Protects your tone against signal loss over long cable runs
- 12 internal routing modes to accommodate any setup
- Input pads for balancing volumes
- Footswitchable boost with up to 30dB of gain
- Tuner output (hold footswitch for tuner mute)
- Variable input loading for tone shaping
- Stereo effects loop with noise filtering
- AB/AY switching options
- Input 1 Impedance: 10kΩ-1MΩ
- Input 2 Impedance: 1MΩ
- Frequency Response: 20Hz – 20kHz
- Total Harmonic Distortion + Noise:
- Out 1: <0.1% (200Hz – 20kHz), <1% (20Hz – 20kHz)
- Out 2 (isolation transformer): <0.1% (200Hz – 20kHz), <1% (55Hz – 20kHz)
- Noise: < -110dBu
- Input Voltage: 9V DC Center-Negative
- Required Current: 100mA
- Power Input Connector: 2.1mm Barrel Connector
- Height: 2”
- Length: 4.5”
- Width: 3.5”
- Weight: 1lb
Empress Effects Buffer++ I/O Interface Pedal
Problem? Solution.
Introducing the Buffer++: The ultimate utility pedal. Pristine buffering, plentiful I/O, and advanced signal control. Route anything, adapt on the fly, and preserve every nuance of your carefully dialed-in sound.
Buffer++
The Empress Buffer++ is built for musicians who want total control over their signal path and the freedom to experiment. Whether you’re toggling between inputs, switching amps, summing loops, or doing something no pedalboard was ever meant to do, the Buffer++ has your back.
It builds on our legacy of transparent, low-noise buffers while pushing far beyond simple tone preservation. Unlike rigid switchers or static ABY boxes, you can switch between guitar and synth, convert stereo rigs to mono, or dial in warm, vintage tones, all without touching a single cable. With 12 powerful routing modes, input metering, ground loop rejection, and variable input loading for tone shaping, the Buffer++ makes complex setups simple.
This pedal isn’t just about cleaning up your signal. It’s about unlocking the rig you’ve always wanted to build but didn’t know how. Stop compromising. Start building.
| Product Name | Empress Effects Buffer++ I/O Interface Pedal |
|---|---|
| Condition | New |
| MPN | BUPP |
| UPC | 850040850413 |
What's in the Box?
Empress Effects Buffer++ I/O Interface Pedal- Protects your tone against signal loss over long cable runs
- 12 internal routing modes to accommodate any setup
- Input pads for balancing volumes
- Footswitchable boost with up to 30dB of gain
- Tuner output (hold footswitch for tuner mute)
- Variable input loading for tone shaping
- Stereo effects loop with noise filtering
- AB/AY switching options
- Input 1 Impedance: 10kΩ-1MΩ
- Input 2 Impedance: 1MΩ
- Frequency Response: 20Hz – 20kHz
- Total Harmonic Distortion + Noise:
- Out 1: <0.1% (200Hz – 20kHz), <1% (20Hz – 20kHz)
- Out 2 (isolation transformer): <0.1% (200Hz – 20kHz), <1% (55Hz – 20kHz)
- Noise: < -110dBu
- Input Voltage: 9V DC Center-Negative
- Required Current: 100mA
- Power Input Connector: 2.1mm Barrel Connector
- Height: 2”
- Length: 4.5”
- Width: 3.5”
- Weight: 1lb
- Choosing a selection results in a full page refresh.
- Opens in a new window.