Phoenix Audio Pivot Tone Channel 500 Series Preamp

The Pivot Tone Channel 500 (formely known as the Tilt Tone channel) is a 500 series channel strip featuring a balanced line level signal processor incorporating our class A discrete buffer amp from our world renowned Nicerizer summing mixer, a DI with our 10meg ohm inputs found in our Nice DI and a 'see-saw' EQ circuit. 

Pivot TC/500 uses a powerful tone control pivot position EQ , a unique 3 position 'see-saw' EQ with 3 carefully selected pivot positions to cover low frequencies at 160hz, mid frequencies at 800hz and high frequencies at 1.6khz. A dark/bright shaping control, allows you to 'see-saw' the EQ to darken your mix (add LF) or brighten the mix (add HF).

There is a also a 10 position LED metering that accurately represents the output level.

The unit can also be used in bypass mode, the ouput control can be driven bringing in the Class A discrete output circuitry and output transformer to add analogue colour and saturation to any source, and a pair of units would be excellent on a mix bus or mastering.

• Class A Stereo DI Output specs.
• Frequency Response: 20Hz to 20Khz +/- 0.5dB
• Maximum Output: +26dBu @ 1Khz
• Noise: 90dB @ 22Hz to 22KHz
• Class A, discrete, truly balanced transformerless input stage.
• The Class A DI has a very high input impedance (10Mohm), without the use of FET's. This means that the guitar pickups are not loaded as with a lower impedance input, and so allows every transient to be reproduced, making even a cheap guitar sound exceptional.
• Inputs: 1/4" jack (TS) input & through input on the front panel
• Transformer isolated balanced output (XLR) on the rear panel
• EQ with 3 fixed pivot positions : 160hz, 800hz & 1.6khz
• Dark/bright tone control
• 10 position LED output metering.
• Output level control.