
- Details
- Features
- Tech Specs
- Reviews
The Radial Bassbone is a power-packed bass preamp that combines real-world functionality with amazing tonal control, making it the ideal front end for live performance and studio recording.
Designed as a bass command center, the Bassbone features two separate channels with independent level controls and powerful EQ to let you perform with two basses on stage and instantly select between them with a footswitch. With Bassbone in your rig, each bass is treated separately - no more compromising! .
On-demand access to the combination effects loop and power booster lets you introduce effects and gives you that extra kick when needed. The Bassbone is also equipped with a built-in Radial direct box that sends 'your sound' to the mixer the way you want it. There's even a separately buffered tuner out that lets you monitor and tune on the fly.
| Product Name | Radial Engineering Bassbone V2 Dual Channel Bass Preamp & DI Pedal |
|---|---|
| Brand | Radial Engineering |
| Condition | New |
| MPN | R8007071 |
| UPC | 676101043491 |
| Shipping Option | Free Shipping to the Continental U.S. |
What's in the Box?
- Radial Engineering Bassbone V2 Dual Channel Bass Preamp & DI Pedal
- Power Adapter
- Two-channel bass preamp for 1 or 2 basses
- Shared effects loop with footswitch
- Variable clean boost circuit and EQ controls
- PZB booster and piezo input for upright bass
- Built-in Radial DI with balanced output for the PA
| Audio circuit type: | Discrete class-A FET input with low noise ICs. |
| Frequency response: | 20Hz ~ 18kHz |
| Dynamic range: | 85dB |
| Gain: | Unity gain device |
| Total harmonic distortion: | 0.05% @ -15dBu |
| Intermodulation Distortion: | 0.2% @ -20dBu |
| Input Impedance: | 220K Ohms input A, 220K/10M Ohms input B |
| Output Impedance: | 300 Ohms at XLR |
| Equivalent Input Noise: | -92dBu at XLR |
| Noise Floor: | -100dB |
| Maximum Input: | +7 dBu |
| Input Connectors: | 1/4" |
| Output Connectors: | 1/4", XLR |
| Construction: | 14 gauge steel |
| Size (L x W x D): | 5.5" x 4.2" x 2" (203 x107 x 48mm) |
| Weight: | 2.55lb (1157 grams) |
| Power: | +15VDC/400mA adapter included |
| Conditions: | For use in dry locations only between 5°C and 40°C |
The Bassbone V2 combines high quality audio performance with the ability to take control of your tone and configure each feature to match your ideal setup. Seamlessly switch between upright and electric basses, while tailoring the signal from the upright with a three band EQ, high-pass filter, and a high impedance input for a more natural tone. You can engage your effects pedals with a single footswitch, and assign them to either input individually, or share them across both. A wet/dry control for the effects loop provides the ability to blend the original bass signal in with the output from the pedals, preserving the tone and clarity of your instrument. The Bassbone V2 also features a powerful clean boost that can be activated with a footswitch, or reconfigured as a mute switch for silent tuning on stage.
| Product Name | Radial Engineering Bassbone V2 Dual Channel Bass Preamp & DI Pedal |
|---|---|
| Brand | Radial Engineering |
| Condition | New |
| MPN | R8007071 |
| UPC | 676101043491 |
| Shipping Option | Free Shipping to the Continental U.S. |
What's in the Box?
- Radial Engineering Bassbone V2 Dual Channel Bass Preamp & DI Pedal
- Power Adapter
- Two-channel bass preamp for 1 or 2 basses
- Shared effects loop with footswitch
- Variable clean boost circuit and EQ controls
- PZB booster and piezo input for upright bass
- Built-in Radial DI with balanced output for the PA
| Audio circuit type: | Discrete class-A FET input with low noise ICs. |
| Frequency response: | 20Hz ~ 18kHz |
| Dynamic range: | 85dB |
| Gain: | Unity gain device |
| Total harmonic distortion: | 0.05% @ -15dBu |
| Intermodulation Distortion: | 0.2% @ -20dBu |
| Input Impedance: | 220K Ohms input A, 220K/10M Ohms input B |
| Output Impedance: | 300 Ohms at XLR |
| Equivalent Input Noise: | -92dBu at XLR |
| Noise Floor: | -100dB |
| Maximum Input: | +7 dBu |
| Input Connectors: | 1/4" |
| Output Connectors: | 1/4", XLR |
| Construction: | 14 gauge steel |
| Size (L x W x D): | 5.5" x 4.2" x 2" (203 x107 x 48mm) |
| Weight: | 2.55lb (1157 grams) |
| Power: | +15VDC/400mA adapter included |
| Conditions: | For use in dry locations only between 5°C and 40°C |
- Choosing a selection results in a full page refresh.
- Opens in a new window.