- Details
- Tech Specs
- Reviews
The headphone amplifier and monitoring controller with 120V technology
Phonitor 3 is the ultimate headphone amplifier and monitoring controller with 120V technology. It offers the same monitoring quality as the big SPL mastering consoles – on loudspeakers and headphones.
The analog Phonitor Matrix allows mixing and mastering on headphones in the highest quality – with the same spatial perception of the stereo stage as on loudspeakers.
Three analog XLR stereo inputs for various sources and a wide range of monitoring options make it the perfect monitor controller for demanding producers and mixing/mastering engineers.
Phonitor 3 can be equipped with the optional Expansion Rack, which is not only a 19″ rack housing, but it also expands the connection possibilities with three additional switchable stereo outputs for active loudspeakers or power amplifiers.
Great sound – for headphones
The Phonitor 3 offers connection for a standard headphone with a stereo jack plug on the front. Thanks to the enormous output power, all kind of headphones are driven effortlessly. Thus, it plays out the advantages of the SPL 120V technology and rewards the listener with an honest, detailed and at the same time vivid sound experience.
Great sound – also for loudspeakers
On the rear of the device, Phonitor 3 offers a stereo output which makes it a high-quality monitoring controller for any monitoring situation. Active speakers with an integrated power amplifier or passive speakers in combination with a power amplifier can be connected at this output.
Monitoring at the highest level
Phonitor 3 offers the same key technology – SPL 120V technology – and signal quality as the big SPL DMC and MMC mastering consoles.
| Product Name | SPL Phonitor 3 Headphone Amplifier |
|---|---|
| Brand | SPL |
| Condition | New |
| MPN | PHONITOR3 |
| UPC | 4260149322883 |
| Shipping Option | Free Shipping to the Continental U.S. |
ANALOG INPUTS & OUTPUTS: XLR (BALANCED) |
|
| Maximum input & output gain | 32.5 dBu |
| Input impedance (XLR) | 20 kΩ |
| Output impedance (XLR) | 75 Ω |
| Common mode rejection ratio (XLR) | -82 dB |
| Frequency range (0 dBu) | 10 Hz – 100 kHz |
| THD +N (1 kHz, 0 dBu) | 0.0009 % |
| Noise (A-weighted) | -102 dBu |
| Crosstalk (1 kHz) | -95 dB |
| Dynamic range | 134.3 dB |
STANDARD HEADPHONES OUTPUT: 6.35 MM (1/4") TRS JACK |
|
| Wiring | Tip = Left, Ring = Right, Sleeve = GND |
| Source impedance | 0.18 Ω |
| Damping factor (40 Ω) | 180 |
| Frequency range (0 dBu) | 10 Hz – 100 kHz |
| Crosstalk (1 kHz, 0 dBu) | -91 dB |
| THD + N (1 kHz, 0 dBu) | 0.0003 % |
| Noise (A-weighted) | -102 dBu |
| Output power (1 kHz, 1% THD, 250 Ω) | 2 x 5 W |
| Output power (1 kHz, 1% THD, 32 Ω) | 2 x 1 W |
| Dynamic range | 134.5 dB |
INTERNAL LINEAR POWER SUPPLY WITH SHIELDED TOROIDAL TRANSFORMER |
|
| Operating voltage for analog audio | +/- 60 V |
| Operating voltage for relays and LEDs | +12 V |
MAINS POWER SUPPLY |
|
| Mains voltage (selectable, see fuse chamber) | 230 V AC / 50; 115 V AC / 60 Hz |
| Fuse for 230 V | T 0.5 A |
| Fuse for 115 V | T 1 A |
| Power consumption | max. 40 VA |
DIMENSIONS & WEIGHT |
|
| W x H x D (width x height incl. feet x depth) | 11 x 4 x 11.81 inch |
| Unit weight | 10.8 lbs |
| Shipping weight (incl. packaging) | 12.5 lbs |
SPL Phonitor 3 Headphone Amplifier
The headphone amplifier and monitoring controller with 120V technology
Phonitor 3 is the ultimate headphone amplifier and monitoring controller with 120V technology. It offers the same monitoring quality as the big SPL mastering consoles – on loudspeakers and headphones.
The analog Phonitor Matrix allows mixing and mastering on headphones in the highest quality – with the same spatial perception of the stereo stage as on loudspeakers.
Three analog XLR stereo inputs for various sources and a wide range of monitoring options make it the perfect monitor controller for demanding producers and mixing/mastering engineers.
Phonitor 3 can be equipped with the optional Expansion Rack, which is not only a 19″ rack housing, but it also expands the connection possibilities with three additional switchable stereo outputs for active loudspeakers or power amplifiers.
Great sound – for headphones
The Phonitor 3 offers connection for a standard headphone with a stereo jack plug on the front. Thanks to the enormous output power, all kind of headphones are driven effortlessly. Thus, it plays out the advantages of the SPL 120V technology and rewards the listener with an honest, detailed and at the same time vivid sound experience.
Great sound – also for loudspeakers
On the rear of the device, Phonitor 3 offers a stereo output which makes it a high-quality monitoring controller for any monitoring situation. Active speakers with an integrated power amplifier or passive speakers in combination with a power amplifier can be connected at this output.
Monitoring at the highest level
Phonitor 3 offers the same key technology – SPL 120V technology – and signal quality as the big SPL DMC and MMC mastering consoles.
| Product Name | SPL Phonitor 3 Headphone Amplifier |
|---|---|
| Brand | SPL |
| Condition | New |
| MPN | PHONITOR3 |
| UPC | 4260149322883 |
ANALOG INPUTS & OUTPUTS: XLR (BALANCED) |
|
| Maximum input & output gain | 32.5 dBu |
| Input impedance (XLR) | 20 kΩ |
| Output impedance (XLR) | 75 Ω |
| Common mode rejection ratio (XLR) | -82 dB |
| Frequency range (0 dBu) | 10 Hz – 100 kHz |
| THD +N (1 kHz, 0 dBu) | 0.0009 % |
| Noise (A-weighted) | -102 dBu |
| Crosstalk (1 kHz) | -95 dB |
| Dynamic range | 134.3 dB |
STANDARD HEADPHONES OUTPUT: 6.35 MM (1/4") TRS JACK |
|
| Wiring | Tip = Left, Ring = Right, Sleeve = GND |
| Source impedance | 0.18 Ω |
| Damping factor (40 Ω) | 180 |
| Frequency range (0 dBu) | 10 Hz – 100 kHz |
| Crosstalk (1 kHz, 0 dBu) | -91 dB |
| THD + N (1 kHz, 0 dBu) | 0.0003 % |
| Noise (A-weighted) | -102 dBu |
| Output power (1 kHz, 1% THD, 250 Ω) | 2 x 5 W |
| Output power (1 kHz, 1% THD, 32 Ω) | 2 x 1 W |
| Dynamic range | 134.5 dB |
INTERNAL LINEAR POWER SUPPLY WITH SHIELDED TOROIDAL TRANSFORMER |
|
| Operating voltage for analog audio | +/- 60 V |
| Operating voltage for relays and LEDs | +12 V |
MAINS POWER SUPPLY |
|
| Mains voltage (selectable, see fuse chamber) | 230 V AC / 50; 115 V AC / 60 Hz |
| Fuse for 230 V | T 0.5 A |
| Fuse for 115 V | T 1 A |
| Power consumption | max. 40 VA |
DIMENSIONS & WEIGHT |
|
| W x H x D (width x height incl. feet x depth) | 11 x 4 x 11.81 inch |
| Unit weight | 10.8 lbs |
| Shipping weight (incl. packaging) | 12.5 lbs |
- Choosing a selection results in a full page refresh.
- Opens in a new window.