- Details
- Features
- Tech Specs
- Reviews
*Please note -- This pre-owned item may show signs of use. Please refer to the photos for details of the product.
The P-912MK2 from TOA Electronics is a 120 watt single-channel modular amplifier ideal for paging, background music, or on-hold music. It offers a wide frequency response, low noise and distortion, and TOA's well-known quality and reliability. It has a single module slot for easy custom configuration using TOA plug-in modules. The system also has a direct input so that it may be used without an input module.
The P-912MK2 has a selectable input sensitivity to accommodate high or low inputs levels, a low cut switch to limit low frequency response, a master volume control, indicators for normal, signal, power, protect, and signal, and a turn-on delay which disconnects the output during power-up to prevent shock to the speakers.
| Product Name | Toa Electronics P-912MK2 120 Watt Single-Channel Modular Power Amplifier |
|---|---|
| Brand | Toa |
| Condition | Pre-Owned |
| MPN | P-912MK2 |
| Shipping Option | Free Shipping to the Continental U.S. |
What's in the Box?
- Toa Electronics P-912MK2 120 Watt Single-Channel Modular Power Amplifier
- Module slot accepts a variety of plug-in modules for easy customizability
- Wide Frequency Response
- Low Noise and Distortion
- 25V, 70V, and 8 ohm transformer-isolated outputs
- Direct input for connection of an audio source
- Direct low-impedance output mode for non-transformer operation
- Selectable Input Sensitivity
- Protection circuitry for overload, short circuit and overheating
- Turn-on delay disconnects output at power-up
- Master volume control
- Status indicators for normal, clip, power, protect, and signal
| Form Factor/Type | Tabletop |
| Output Power | 120 watt |
| Damping Factor | Not Specified by Manufacturer |
| Input Sensitivity | 100 mV or 1000 mV (Switchable) |
| Input Impedance | 10 k ohms |
| Number of Amplifier Channels | 1 |
| Dynamic Range | 108 dB (0 dBV, 1000 mV) 90 dB (-20 dBV, 100 mV) |
| Frequency Response | 20Hz - 20kHz |
| Load Impedance/Voltage Support | 8 Ohms 25 / 70 V |
| Power Rating per Channel | 1x 120 W |
| Signal-to-Noise Ratio | Not Specified by Manufacturer |
| Total Harmonic Distortion (THD) | 0.01% |
| Input Connections | 1 x Direct Input 1 x Module Slot (Optional Modules Include XLR, 1/4", etc) |
| Output Connectors | Rear Panel Barrier Strip |
Performance |
|
|---|---|
| Protections | On/Off Muting, Overcurrent, Short Circuit, Thermal |
| Controls Front Panel | Power Switch, Volume Control |
| Controls (Rear) | Input Sensitivity Switch, Direct/Transformer Switch, Low Cut Switch |
| Frequency Response | 20 Hz to 20 kHz |
| Indicators | Front-Panel LEDs for Normal, Clip, Power, Protect, and Signal |
| Cooling | Not Specified by Manufacturer |
| Power Consumption | 180W |
| THD/Distortion | ≤ 0.01% THD |
| Dimensions | 16.5 x 3.9 x 14.1" (420 x 99 x 358 mm) |
| Weight | 24 lbs (10.9 kg) (Without Module) |
Signal Processing |
|
| DSP | No |
| Specialties | Outputs Connect Approx. 5 Seconds After Powering On Protection Circuitry for Overload, Overheating, and Short Circuit |
Connectivity |
|
| Analog Audio I/O | 1x Barrier Strip Input 1x Proprietary Input 1x Barrier Strip Outputsvg |
| Digital Audio I/O | No |
| Network I/O | No |
| USB I/O | No |
| Phantom Power | No |
| Wireless | No |
Power |
|
| Input Power | 120 VAC, 60 Hz |
| AC Power Connector | 1x IEC |
| Current Consumption | 3 A |
| Power Consumption | 180 W |
*Please note -- This pre-owned item may show signs of use. Please refer to the photos for details of the product.
The P-912MK2 from TOA Electronics is a 120 watt single-channel modular amplifier ideal for paging, background music, or on-hold music. It offers a wide frequency response, low noise and distortion, and TOA's well-known quality and reliability. It has a single module slot for easy custom configuration using TOA plug-in modules. The system also has a direct input so that it may be used without an input module.
The P-912MK2 has a selectable input sensitivity to accommodate high or low inputs levels, a low cut switch to limit low frequency response, a master volume control, indicators for normal, signal, power, protect, and signal, and a turn-on delay which disconnects the output during power-up to prevent shock to the speakers.
| Product Name | Toa Electronics P-912MK2 120 Watt Single-Channel Modular Power Amplifier |
|---|---|
| Brand | Toa |
| Condition | Pre-Owned |
| MPN | P-912MK2 |
What's in the Box?
Toa Electronics P-912MK2 120 Watt Single-Channel Modular Power Amplifier- Module slot accepts a variety of plug-in modules for easy customizability
- Wide Frequency Response
- Low Noise and Distortion
- 25V, 70V, and 8 ohm transformer-isolated outputs
- Direct input for connection of an audio source
- Direct low-impedance output mode for non-transformer operation
- Selectable Input Sensitivity
- Protection circuitry for overload, short circuit and overheating
- Turn-on delay disconnects output at power-up
- Master volume control
- Status indicators for normal, clip, power, protect, and signal
| Form Factor/Type | Tabletop |
| Output Power | 120 watt |
| Damping Factor | Not Specified by Manufacturer |
| Input Sensitivity | 100 mV or 1000 mV (Switchable) |
| Input Impedance | 10 k ohms |
| Number of Amplifier Channels | 1 |
| Dynamic Range | 108 dB (0 dBV, 1000 mV) 90 dB (-20 dBV, 100 mV) |
| Frequency Response | 20Hz - 20kHz |
| Load Impedance/Voltage Support | 8 Ohms 25 / 70 V |
| Power Rating per Channel | 1x 120 W |
| Signal-to-Noise Ratio | Not Specified by Manufacturer |
| Total Harmonic Distortion (THD) | 0.01% |
| Input Connections | 1 x Direct Input 1 x Module Slot (Optional Modules Include XLR, 1/4", etc) |
| Output Connectors | Rear Panel Barrier Strip |
Performance |
|
|---|---|
| Protections | On/Off Muting, Overcurrent, Short Circuit, Thermal |
| Controls Front Panel | Power Switch, Volume Control |
| Controls (Rear) | Input Sensitivity Switch, Direct/Transformer Switch, Low Cut Switch |
| Frequency Response | 20 Hz to 20 kHz |
| Indicators | Front-Panel LEDs for Normal, Clip, Power, Protect, and Signal |
| Cooling | Not Specified by Manufacturer |
| Power Consumption | 180W |
| THD/Distortion | ≤ 0.01% THD |
| Dimensions | 16.5 x 3.9 x 14.1" (420 x 99 x 358 mm) |
| Weight | 24 lbs (10.9 kg) (Without Module) |
Signal Processing |
|
| DSP | No |
| Specialties | Outputs Connect Approx. 5 Seconds After Powering On Protection Circuitry for Overload, Overheating, and Short Circuit |
Connectivity |
|
| Analog Audio I/O | 1x Barrier Strip Input 1x Proprietary Input 1x Barrier Strip Outputsvg |
| Digital Audio I/O | No |
| Network I/O | No |
| USB I/O | No |
| Phantom Power | No |
| Wireless | No |
Power |
|
| Input Power | 120 VAC, 60 Hz |
| AC Power Connector | 1x IEC |
| Current Consumption | 3 A |
| Power Consumption | 180 W |
- Choosing a selection results in a full page refresh.
- Opens in a new window.